|
|
Force Sensors & Load Cells This very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force the lower
- SEN-09674
- SparkFun
-
1:
30,23 €
-
8In Stock
|
Mouser Part No
474-SEN-09674
|
SparkFun
|
Force Sensors & Load Cells This very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force the lower
|
|
8In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Screwdrivers, Nut Drivers & Socket Drivers This is just your basic reversible screwdriver - pocket sized! Both flat and phillips heads available. Comes with pin clip and snazzy SparkFun logo.
- TOL-09146
- SparkFun
-
1:
1,47 €
-
29In Stock
|
Mouser Part No
474-TOL-09146
|
SparkFun
|
Screwdrivers, Nut Drivers & Socket Drivers This is just your basic reversible screwdriver - pocket sized! Both flat and phillips heads available. Comes with pin clip and snazzy SparkFun logo.
|
|
29In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Antenna Accessories Many magnetic mount GPS antennas rely on being mounted on a car or other large metallic object to provide a good ground plane. But what if you want to use an antenna not on a car? The GPS Antenna Ground Plate is the solution! This plate significantly
- GPS-17519
- SparkFun
-
1:
6,96 €
-
34In Stock
|
Mouser Part No
474-GPS-17519
|
SparkFun
|
Antenna Accessories Many magnetic mount GPS antennas rely on being mounted on a car or other large metallic object to provide a good ground plane. But what if you want to use an antenna not on a car? The GPS Antenna Ground Plate is the solution! This plate significantly
|
|
34In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Current Sensors – Industrial Measuring high-voltage AC current doesn't have to mean splicing into live dangerous wires. This non-invasive current sensor also known as a split-core current transformer or current clamp lets you measure exactly how much current is passing throug
- SEN-11005
- SparkFun
-
1:
13,38 €
-
3In Stock
|
Mouser Part No
474-SEN-11005
|
SparkFun
|
Current Sensors – Industrial Measuring high-voltage AC current doesn't have to mean splicing into live dangerous wires. This non-invasive current sensor also known as a split-core current transformer or current clamp lets you measure exactly how much current is passing throug
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools Looking for a low-cost way to send and receive data messages via satellite? This is it! With a clear view of the sky the Swarm M138 Satellite Transceiver allows you to send and receive short messages. It works anywhere in the world including the po
- SPX-20107
- SparkFun
-
1:
16,14 €
-
3In Stock
|
Mouser Part No
474-SPX-20107
|
SparkFun
|
RF Development Tools Looking for a low-cost way to send and receive data messages via satellite? This is it! With a clear view of the sky the Swarm M138 Satellite Transceiver allows you to send and receive short messages. It works anywhere in the world including the po
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Raspberry Pi Accessories This 2x20 shrouded header has the same number and spacing of pins as a Raspberry Pi so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.Ch
- PRT-13054
- SparkFun
-
1:
0,91 €
-
40In Stock
|
Mouser Part No
474-PRT-13054
|
SparkFun
|
Raspberry Pi Accessories This 2x20 shrouded header has the same number and spacing of pins as a Raspberry Pi so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.Ch
|
|
40In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Headers & Wire Housings This is a simple 3-pin male PTH straight header. Each pin can even be broken apart if you only need one or two pins instead of all three.The pins on this header have been spaced at the 0.1" standard.
- PRT-27908
- SparkFun
-
1:
0,268 €
-
90In Stock
-
New Product
|
Mouser Part No
474-PRT-27908
New Product
|
SparkFun
|
Headers & Wire Housings This is a simple 3-pin male PTH straight header. Each pin can even be broken apart if you only need one or two pins instead of all three.The pins on this header have been spaced at the 0.1" standard.
|
|
90In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
NFC/RFID Tags & Transponders This is a basic RFID tag that operates in accordance with the MIFARE Classic 1K specifications. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a co
- SEN-10127
- SparkFun
-
1:
3,45 €
-
27In Stock
|
Mouser Part No
474-SEN-10127
|
SparkFun
|
NFC/RFID Tags & Transponders This is a basic RFID tag that operates in accordance with the MIFARE Classic 1K specifications. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a co
|
|
27In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
NFC/RFID Tags & Transponders This is a basic RFID tag that operates in accordance with the MIFARE Classic 1K specifications. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a co
- SEN-10128
- SparkFun
-
1:
3,45 €
-
108In Stock
|
Mouser Part No
474-SEN-10128
|
SparkFun
|
NFC/RFID Tags & Transponders This is a basic RFID tag that operates in accordance with the MIFARE Classic 1K specifications. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a co
|
|
108In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Force Sensors & Load Cells This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing hard the resistance changes from infinite to 50k. The sensor itself is thin and flexible but the resistance does not change while
- SEN-11207
- SparkFun
-
1:
27,05 €
-
4In Stock
|
Mouser Part No
474-SEN-11207
|
SparkFun
|
Force Sensors & Load Cells This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing hard the resistance changes from infinite to 50k. The sensor itself is thin and flexible but the resistance does not change while
|
|
4In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Screwdrivers, Nut Drivers & Socket Drivers What should every hacker have available to them? That's right a screwdriver (you have to get into those cases somehow). What makes screwdrivers even better is when there are a variety of interchangeable bits to use in different situations as you nee
- TOL-12891
- SparkFun
-
1:
4,73 €
-
5In Stock
|
Mouser Part No
474-TOL-12891
|
SparkFun
|
Screwdrivers, Nut Drivers & Socket Drivers What should every hacker have available to them? That's right a screwdriver (you have to get into those cases somehow). What makes screwdrivers even better is when there are a variety of interchangeable bits to use in different situations as you nee
|
|
5In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Multilayer Ceramic Capacitors MLCC - Leaded This is a basic 1000pF 100V 5% tolerance PTH ceramic capacitor.
- COM-30151
- SparkFun
-
1:
0,358 €
-
96In Stock
-
New Product
|
Mouser Part No
474-COM-30151
New Product
|
SparkFun
|
Multilayer Ceramic Capacitors MLCC - Leaded This is a basic 1000pF 100V 5% tolerance PTH ceramic capacitor.
|
|
96In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
DC Fans The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load. The temperature-controlled
- PRT-17368
- SparkFun
-
1:
6,15 €
-
6In Stock
|
Mouser Part No
474-PRT-17368
|
SparkFun
|
DC Fans The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load. The temperature-controlled
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Antenna Accessories This aluminum adapter converts the very common 1/4" thread found on camera tri-pods and mono-pods to the 5/8" 11-TPI (threads per inch) found on high-end surveying antennas and equipment. It's ideal for mounting RTK surveying antennas onto a monopod
- PRT-17546
- SparkFun
-
1:
5,67 €
-
89In Stock
|
Mouser Part No
474-PRT-17546
|
SparkFun
|
Antenna Accessories This aluminum adapter converts the very common 1/4" thread found on camera tri-pods and mono-pods to the 5/8" 11-TPI (threads per inch) found on high-end surveying antennas and equipment. It's ideal for mounting RTK surveying antennas onto a monopod
|
|
89In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Educational Robotic Kits This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensor
- ROB-12629
- SparkFun
-
1:
12,00 €
-
28In Stock
|
Mouser Part No
474-ROB-12629
|
SparkFun
|
Educational Robotic Kits This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensor
|
|
28In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Board Mount Motion & Position Sensors This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage
- SEN-09197
- SparkFun
-
1:
11,14 €
-
1In Stock
-
7On Order
|
Mouser Part No
474-SEN-09197
|
SparkFun
|
Board Mount Motion & Position Sensors This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage
|
|
1In Stock
7On Order
Stock:
1 Can Dispatch Immediately
On Order:
3 Pending
4 Expected 29/10/2026
Factory Lead Time:
3 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Pressure Sensor Development Tools Force Sensitive Resistor - Small
- SEN-09673
- SparkFun
-
1:
10,27 €
-
100In Stock
|
Mouser Part No
474-SEN-09673
|
SparkFun
|
Pressure Sensor Development Tools Force Sensitive Resistor - Small
|
|
100In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Air Quality Sensors The MQ-9B is a CO and CH gas-detection sensor from Winsen. The sensing material of the MQ-9B is SnO2 which has a low conductivity in clean air. It detects carbon monoxide (1.5V) by cycling between high and low temperatures. The sensor s conduct
- SEN-17050
- SparkFun
-
1:
5,59 €
-
10In Stock
|
Mouser Part No
474-SEN-17050
|
SparkFun
|
Air Quality Sensors The MQ-9B is a CO and CH gas-detection sensor from Winsen. The sensing material of the MQ-9B is SnO2 which has a low conductivity in clean air. It detects carbon monoxide (1.5V) by cycling between high and low temperatures. The sensor s conduct
|
|
10In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Timers & Support Products This is a common 555 timer/oscillator from TI. A classic for all of those first year circuits projects where you need to blink an LED generate tone and thousands of other great beginning projects. Google around for a huge list of resources and exam
- COM-16473
- SparkFun
-
1:
0,95 €
-
191In Stock
-
360Expected 21/10/2026
|
Mouser Part No
474-COM-16473
|
SparkFun
|
Timers & Support Products This is a common 555 timer/oscillator from TI. A classic for all of those first year circuits projects where you need to blink an LED generate tone and thousands of other great beginning projects. Google around for a huge list of resources and exam
|
|
191In Stock
360Expected 21/10/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Solder Solder wick coffee and paper towels keep SparkFun running. You can steal someone's diagonal cutters for a minute but you'd better ask before touching their solder wick.Desoldering braid or desoldering wick is a pre-fluxed copper braid that is used
- TOL-29531
- SparkFun
-
1:
9,79 €
-
1In Stock
-
New Product
|
Mouser Part No
474-TOL-29531
New Product
|
SparkFun
|
Solder Solder wick coffee and paper towels keep SparkFun running. You can steal someone's diagonal cutters for a minute but you'd better ask before touching their solder wick.Desoldering braid or desoldering wick is a pre-fluxed copper braid that is used
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Bluetooth Development Tools - 802.15.1 If you are looking for a board that can truly handle your next Internet of Things project look no further. The SparkFun Artemis Thing Plus combines the powerful Artemis module with our popular Thing Plus footprint. It packs 1MB flash 384k RAM an
- WRL-15574
- SparkFun
-
1:
22,32 €
-
19In Stock
|
Mouser Part No
474-WRL-15574
|
SparkFun
|
Bluetooth Development Tools - 802.15.1 If you are looking for a board that can truly handle your next Internet of Things project look no further. The SparkFun Artemis Thing Plus combines the powerful Artemis module with our popular Thing Plus footprint. It packs 1MB flash 384k RAM an
|
|
19In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Multiprotocol Modules The ESP32-WROOM-32E is a powerful generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications ranging from low-power sensor networks to the most demanding tasks such as voice encoding music streaming and MP3 decoding. At the core
- WRL-17830
- SparkFun
-
1:
3,64 €
-
4In Stock
|
Mouser Part No
474-WRL-17830
|
SparkFun
|
Multiprotocol Modules The ESP32-WROOM-32E is a powerful generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications ranging from low-power sensor networks to the most demanding tasks such as voice encoding music streaming and MP3 decoding. At the core
|
|
4In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Programmable Logic IC Development Tools SparkFun QuickLogic Thing Plus - EOS S3
- DEV-17273
- SparkFun
-
1:
43,10 €
-
19In Stock
|
Mouser Part No
474-DEV-17273
|
SparkFun
|
Programmable Logic IC Development Tools SparkFun QuickLogic Thing Plus - EOS S3
|
|
19In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Single Board Computers The micro:bit v2 Go Bundle is the quickest and most economical way to get started with the micro:bit ecosystem. While the standalone board is great for those who already have a workshop full of cables this bundle is designed for those who want to hi
- DEV-17288
- SparkFun
-
1:
26,83 €
-
8In Stock
|
Mouser Part No
474-DEV-17288
|
SparkFun
|
Single Board Computers The micro:bit v2 Go Bundle is the quickest and most economical way to get started with the micro:bit ecosystem. While the standalone board is great for those who already have a workshop full of cables this bundle is designed for those who want to hi
|
|
8In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Headers & Wire Housings This is a super small 2x5 pin female PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other.
- PRT-15363
- SparkFun
-
1:
1,68 €
-
73In Stock
|
Mouser Part No
474-PRT-15363
|
SparkFun
|
Headers & Wire Housings This is a super small 2x5 pin female PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other.
|
|
73In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
