|
|
Signal Conditioning This equalizer provides 4 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 6 dB and a 50-ohm match maintained over the entire operating range.
- MEQ6-60ABH
- Marki Microwave
-
1:
750,61 €
-
1In Stock
-
New Product
|
Mouser Part No
10-MEQ6-60ABH
New Product
|
Marki Microwave
|
Signal Conditioning This equalizer provides 4 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 6 dB and a 50-ohm match maintained over the entire operating range.
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 9 GHz bandwidth.
- BAL-0009SMG
- Marki Microwave
-
1:
281,72 €
-
87In Stock
-
New At Mouser
|
Mouser Part No
10-BAL-0009SMG
New At Mouser
|
Marki Microwave
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 9 GHz bandwidth.
|
|
87In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools This is the evaluation board for the ABDS-10170PSM - a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB differential to single ended gain (low end limited by DC block).
Marki Microwave EVB-ABDS-10170P
- EVB-ABDS-10170P
- Marki Microwave
-
1:
598,69 €
-
1In Stock
-
New Product
|
Mouser Part No
10-EVB-ABDS-10170P
New Product
|
Marki Microwave
|
RF Development Tools This is the evaluation board for the ABDS-10170PSM - a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB differential to single ended gain (low end limited by DC block).
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
Max.: 5
|
|
|
|
|
RF Development Tools This is the evaluation board for the MM1A-0626SPSM integrated drive GaAs MMIC mixer.
Marki Microwave EVB-MM1A-0626S
- EVB-MM1A-0626S
- Marki Microwave
-
1:
598,69 €
-
1In Stock
-
New Product
|
Mouser Part No
10-EVB-MM1A-0626S
New Product
|
Marki Microwave
|
RF Development Tools This is the evaluation board for the MM1A-0626SPSM integrated drive GaAs MMIC mixer.
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
Max.: 5
|
|
|
|
|
RF Development Tools The EVB-MEQ6-20 is a connectorized evaluation board for the MEQ6-20CSP1 passive MMIC surface mount 20 GHz equalizer.
Marki Microwave EVB-MEQ6-20
- EVB-MEQ6-20
- Marki Microwave
-
1:
553,41 €
-
1In Stock
-
New Product
|
Mouser Part No
10-EVB-MEQ6-20
New Product
|
Marki Microwave
|
RF Development Tools The EVB-MEQ6-20 is a connectorized evaluation board for the MEQ6-20CSP1 passive MMIC surface mount 20 GHz equalizer.
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
Max.: 5
|
|
|
|
|
RF Development Tools The EVB-MFBC-00004 is a connectorized evaluation board for the MFBC-00004CSP3 passive MMIC surface mount 15-19.8GHz bandpass filter.
Marki Microwave EVB-MFBC-00004
- EVB-MFBC-00004
- Marki Microwave
-
1:
598,69 €
-
1In Stock
-
New Product
|
Mouser Part No
10-EVB-MFBC-00004
New Product
|
Marki Microwave
|
RF Development Tools The EVB-MFBC-00004 is a connectorized evaluation board for the MFBC-00004CSP3 passive MMIC surface mount 15-19.8GHz bandpass filter.
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
Max.: 5
|
|
|
|
|
RF Development Tools The EVB-MPD-0222S is a connectorized evaluation board for the MPD-0222SCSP2 MMIC 2-22GHz 2-Way power divider/power splitter.
Marki Microwave EVB-MPD-0222S
- EVB-MPD-0222S
- Marki Microwave
-
1:
498,07 €
-
1In Stock
-
New Product
|
Mouser Part No
10-EVB-MPD-0222S
New Product
|
Marki Microwave
|
RF Development Tools The EVB-MPD-0222S is a connectorized evaluation board for the MPD-0222SCSP2 MMIC 2-22GHz 2-Way power divider/power splitter.
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
Max.: 5
|
|
|
|
|
RF Development Tools The EVB-MFLP-00028 is a connectorized evaluation board for the MFLP-00028CSP1 passive MMIC surface mount 10.7 GHz lowpass filter.
Marki Microwave EVB-MFLP-00028
- EVB-MFLP-00028
- Marki Microwave
-
1:
598,69 €
-
1In Stock
-
New Product
|
Mouser Part No
10-EVB-MFLP-00028
New Product
|
Marki Microwave
|
RF Development Tools The EVB-MFLP-00028 is a connectorized evaluation board for the MFLP-00028CSP1 passive MMIC surface mount 10.7 GHz lowpass filter.
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
Max.: 5
|
|
|
|
|
RF Development Tools The EVB-MEQ3-20 is a connectorized evaluation board for the MEQ3-20CSP1 passive MMIC surface mount 20 GHz equalizer.
Marki Microwave EVB-MEQ3-20
- EVB-MEQ3-20
- Marki Microwave
-
1:
553,41 €
-
1In Stock
-
New Product
|
Mouser Part No
10-EVB-MEQ3-20
New Product
|
Marki Microwave
|
RF Development Tools The EVB-MEQ3-20 is a connectorized evaluation board for the MEQ3-20CSP1 passive MMIC surface mount 20 GHz equalizer.
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
Max.: 5
|
|
|
|
|
RF Development Tools The EVB-MFLP-00011P is a connectorized evaluation board for the MFLP-00011PSM passive MMIC surface mount 7.1GHz lowpass filter.
Marki Microwave EVB-MFLP-00011P
- EVB-MFLP-00011P
- Marki Microwave
-
1:
598,69 €
-
1In Stock
-
New Product
|
Mouser Part No
10-EVB-MFLP-00011P
New Product
|
Marki Microwave
|
RF Development Tools The EVB-MFLP-00011P is a connectorized evaluation board for the MFLP-00011PSM passive MMIC surface mount 7.1GHz lowpass filter.
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
Max.: 5
|
|
|
|
|
Marki Microwave MMIC, 12-16 GHz Bandpass Filter, CSP3, QFN mounted into evaluation board (2.92mm-F)
Marki Microwave EVB-MFBP-00152
- EVB-MFBP-00152
- Marki Microwave
-
1:
604,08 €
-
2In Stock
-
New Product
|
Mouser Part No
10-EVB-MFBP-00152
New Product
|
Marki Microwave
|
Marki Microwave MMIC, 12-16 GHz Bandpass Filter, CSP3, QFN mounted into evaluation board (2.92mm-F)
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
Max.: 5
|
|
|
|
|
Attenuators The ATN10-0040PSM is a surface mount GaAs MMIC 10dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
- ATN10-0040PSM
- Marki Microwave
-
1:
22,58 €
-
25In Stock
-
New At Mouser
|
Mouser Part No
10-ATN10-0040PSM
New At Mouser
|
Marki Microwave
|
Attenuators The ATN10-0040PSM is a surface mount GaAs MMIC 10dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
|
|
25In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVB-MPD4-0108 is a connectorized evaluation board for the MPD4-0108CSP2 MMIC 1-8GHz 4-Way power divider/power splitter.
- EVB-MPD4-0108
- Marki Microwave
-
1:
498,07 €
-
2In Stock
-
New Product
|
Mouser Part No
10-EVB-MPD4-0108
New Product
|
Marki Microwave
|
RF Development Tools The EVB-MPD4-0108 is a connectorized evaluation board for the MPD4-0108CSP2 MMIC 1-8GHz 4-Way power divider/power splitter.
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
Max.: 5
|
|
|
|
|
Attenuators The ATN01-0040PSM is a surface mount GaAs MMIC 1dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
- ATN01-0040PSM
- Marki Microwave
-
1:
22,58 €
-
39In Stock
-
New At Mouser
|
Mouser Part No
10-ATN01-0040PSM
New At Mouser
|
Marki Microwave
|
Attenuators The ATN01-0040PSM is a surface mount GaAs MMIC 1dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
|
|
39In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The MPDR-0070CSP2 is a small footprint mmWave MMIC DC-70 GHz 2-Way resistive power divider/power splitter featuring low 1.5 dB insertion loss in our compact CSP2 chip scale package. It is much smaller than a printed PCB Power Divider/Combiner.
- MPDR-0070CSP2
- Marki Microwave
-
1:
138,22 €
-
4In Stock
-
New At Mouser
|
Mouser Part No
10-MPDR-0070CSP2
New At Mouser
|
Marki Microwave
|
Signal Conditioning The MPDR-0070CSP2 is a small footprint mmWave MMIC DC-70 GHz 2-Way resistive power divider/power splitter featuring low 1.5 dB insertion loss in our compact CSP2 chip scale package. It is much smaller than a printed PCB Power Divider/Combiner.
|
|
4In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Attenuators The ATN02-0040PSM is a surface mount GaAs MMIC 2dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
- ATN02-0040PSM
- Marki Microwave
-
1:
22,58 €
-
25In Stock
-
New At Mouser
|
Mouser Part No
10-ATN02-0040PSM
New At Mouser
|
Marki Microwave
|
Attenuators The ATN02-0040PSM is a surface mount GaAs MMIC 2dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
|
|
25In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVB-MMPX-00001P is a connectorized evaluation board for the MMPX-00001PSM is a MMIC surface mount quadplexer capable of multiplexing 2-4 GHz / 6-8 GHz / 10-12 GHz / 14-16 GHz signals.
- EVB-MMPX-00001P
- Marki Microwave
-
1:
649,00 €
-
1In Stock
-
New At Mouser
|
Mouser Part No
10-EVB-MMPX-00001P
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVB-MMPX-00001P is a connectorized evaluation board for the MMPX-00001PSM is a MMIC surface mount quadplexer capable of multiplexing 2-4 GHz / 6-8 GHz / 10-12 GHz / 14-16 GHz signals.
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
Max.: 5
|
|
|
|
|
RF Development Tools The MFBC-00001P is a connectorized evaluation board for the MFBC-00001PSM passive MMIC surface mount 7.40 9.90 GHz bandpass filters.
- EVB-MFBC-00001P
- Marki Microwave
-
1:
598,69 €
-
1In Stock
-
New At Mouser
|
Mouser Part No
10-EVB-MFBC-00001P
New At Mouser
|
Marki Microwave
|
RF Development Tools The MFBC-00001P is a connectorized evaluation board for the MFBC-00001PSM passive MMIC surface mount 7.40 9.90 GHz bandpass filters.
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
Max.: 5
|
|
|
|
|
Signal Conditioning The MPD-0R402SCSP2 is a small footprint MMIC 0.4-2.5 GHz 2-Way power divider/power splitter featuring high 20 dB isolation and low 1 dB insertion loss in our compact CSP2 chip scale package.
- MPD-0R402SCSP2
- Marki Microwave
-
1:
36,92 €
-
45In Stock
-
50Expected 19/11/2026
-
New At Mouser
|
Mouser Part No
10-MPD-0R402SCSP2
New At Mouser
|
Marki Microwave
|
Signal Conditioning The MPD-0R402SCSP2 is a small footprint MMIC 0.4-2.5 GHz 2-Way power divider/power splitter featuring high 20 dB isolation and low 1 dB insertion loss in our compact CSP2 chip scale package.
|
|
45In Stock
50Expected 19/11/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Mixer The MMIQ-0416LSM is a low LO drive, passive GaAs MMIC IQ. This is an ultra-broadband mixer spanning 4 to 16GHz on the RF and LO ports with an IF from DC to 6 GHz.
- MMIQ-0416LSM-2
- Marki Microwave
-
1:
179,49 €
-
73In Stock
-
New At Mouser
|
Mouser Part No
10-MMIQ-0416LSM-2
New At Mouser
|
Marki Microwave
|
RF Mixer The MMIQ-0416LSM is a low LO drive, passive GaAs MMIC IQ. This is an ultra-broadband mixer spanning 4 to 16GHz on the RF and LO ports with an IF from DC to 6 GHz.
|
|
73In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVB-HLM-8010 is a high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 40GHz bandwidth.
- EVB-HLM-8010
- Marki Microwave
-
1:
553,41 €
-
1In Stock
-
New At Mouser
|
Mouser Part No
10-EVB-HLM-8010
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVB-HLM-8010 is a high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 40GHz bandwidth.
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
Max.: 5
|
|
|
|
|
RF Development Tools The EVB-MFLP-00002P is a connectorized evaluation board for the MFLP-00002PSM passive MMIC surface mount 9.40GHz lowpass filter.
- EVB-MFLP-00002P
- Marki Microwave
-
1:
598,69 €
-
1In Stock
-
New At Mouser
|
Mouser Part No
10-EVB-MFLP-00002P
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVB-MFLP-00002P is a connectorized evaluation board for the MFLP-00002PSM passive MMIC surface mount 9.40GHz lowpass filter.
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
Max.: 5
|
|
|
|
|
Signal Conditioning MC16-0222SM is a MMIC 2-22 GHz Directional Coupler. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MC16-0222SM is available as a 4 X 4 mm QFN package.
- MC16-0222SM
- Marki Microwave
-
1:
90,15 €
-
44In Stock
-
New At Mouser
|
Mouser Part No
10-MC16-0222SM
New At Mouser
|
Marki Microwave
|
Signal Conditioning MC16-0222SM is a MMIC 2-22 GHz Directional Coupler. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MC16-0222SM is available as a 4 X 4 mm QFN package.
|
|
44In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Attenuators The ATN00-0040PSM is a surface mount GaAs MMIC 0dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
- ATN00-0040PSM
- Marki Microwave
-
1:
22,58 €
-
19In Stock
-
New At Mouser
|
Mouser Part No
10-ATN00-0040PSM
New At Mouser
|
Marki Microwave
|
Attenuators The ATN00-0040PSM is a surface mount GaAs MMIC 0dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
|
|
19In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Mixer A broadband passive GaAs MMIC IQ mixer that operates across an unrivaled 2-18 GHz RF/LO band with an IF from DC to 3 GHz. Excellent phase and amplitude balance of the on-chip LO quadrature hybrid leads to typical image rejection of 35 dB.
- MMIQ-0218HSM-2
- Marki Microwave
-
1:
444,60 €
-
7In Stock
-
25Expected 16/11/2026
-
New At Mouser
|
Mouser Part No
10-MMIQ-0218HSM-2
New At Mouser
|
Marki Microwave
|
RF Mixer A broadband passive GaAs MMIC IQ mixer that operates across an unrivaled 2-18 GHz RF/LO band with an IF from DC to 3 GHz. Excellent phase and amplitude balance of the on-chip LO quadrature hybrid leads to typical image rejection of 35 dB.
|
|
7In Stock
25Expected 16/11/2026
|
|
Min.: 1
Mult.: 1
|
|
|