Filters

Availability options
Applied filters
Manufacturer = Multiple Values
Select Image Part #
 Mfr.
Description Datasheet Availability Pricing (EUR) Filter the results in the table by unit price based on your quantity.
Qty. RoHS
SparkFun SparkFun Accessories This 0.012" Flexinol Actuator Wires (aka shape memory Nitinol) is a one foot long piece of nickel-titanium alloy that can flex and contract when a specific amount of heat or current is applied to it and are made specifically for linear actuators to
Datasheet
181In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories So much power and light from such a small package. This 5 pack of "Warm" white 3 Watt aluminum backed PCBs is sure to shed a lot of light on any project you add it to. These LEDs act as any other LED except these little guys require much more power w 15In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Here is a six pin vertical 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards but are actually the much smaller JST-SH type. 17In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories 2x5 Pin Shrouded Header 69In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Heat Sink Compound 125In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories 2x3 Pin Shrouded Header 31In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Stackable Header 2x23 Pin Female 35In Stock
170Expected 31/08/2026
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This is a simple 2x3 male PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet 50In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of headers allows you to stack Feather
Datasheet
54In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Soldering Iron Stand 4In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories 2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long. Not sure which RF connector you need on your antenna? Check out our RF Connector Guide 3In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. This antenna mates nicely with the Reverse Polarized SMA Connector. 6In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories 900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long. Be sure to pick the antenna with the right connector. Almost all 2.4GHz and 915MHz antennas need to be RP-SMA. 77In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to connect larger GPS antennas and quad-band cellular antennas. 93In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL to SMA cables together we can go straight from one U.FL device to another. As an added bonus
Datasheet
16In Stock
Min.: 1
Mult.: 1

SparkFun Zigbee Development Tools - 802.15.4 XBee Shield 38In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Unlock the hidden potential of your motherboard s USB headers. This 6-foot extension cable features a 4-pin female header on one end and a panel-mountable USB-A connector on the other allowing you to place a standard USB port exactly where you nee 25In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories There are a lot of devices out there that still communicate over RS232 but we bet your new laptop isn't one of them. Don't worry though we've got you covered. This 6ft converter plugs into your computer's USB port and provides you with a DB-9 RSR23 21In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Rotary Encoder
Datasheet
11In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This is a standard 12mm square momentary button. What we really like is the large button head and good tactile feel (it 'clicks' really well). This button is great for user input on a PCB or a good big reset button on a breadboard. Breadboard friend 181In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This is a simple LED-illuminated tactile button with a clear cap. It's just like a basic tactile button but it lights up blue! So now you can get visual feedback or light up your project. These have a 12mm body and are rated for 50mA. They don't ea 15In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Potentiometers are incredibly useful whether you're controlling the volume on your stereo or the 'mood lighting' in your room. The problem with traditional potentiometers is the fact that your microcontroller doesn't have an easy way to interface wi 17In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Tactile Button SMD (6mm) 48In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories So much power and light from such a small package. This 5 pack of "Cool" white 3 Watt aluminum backed PCBs is sure to shed a lot of light on any project you add it to. These LEDs act as any other LED except these little guys require much more power w 3In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Amphenol FCI Clinchr Conn. (3 POS,F)
Datasheet
17In Stock
Min.: 1
Mult.: 1