|
|
RF Development Tools .5-6GHz NF 1.4dB Eval Board
- TQL9062-PCB
- Qorvo
-
1:
88,71 €
-
5Expected 02/10/2026
|
Mouser Part No
772-TQL9062-PCB
|
Qorvo
|
RF Development Tools .5-6GHz NF 1.4dB Eval Board
|
|
5Expected 02/10/2026
|
|
Min.: 1
Mult.: 1
|
|
Evaluation Boards
|
RF Amplifier
|
TQL9062
|
3.3 GHz to 3.8 GHz
|
|
|
|
RF Development Tools 1.5-4.0GHz NF .7dB Eval Board
- TQL9063-PCB
- Qorvo
-
1:
148,50 €
-
4On Order
|
Mouser Part No
772-TQL9063-PCB
|
Qorvo
|
RF Development Tools 1.5-4.0GHz NF .7dB Eval Board
|
|
4On Order
On Order:
1 Expected 21/10/2026
3 Expected 16/12/2026
Factory Lead Time:
14 Weeks
|
|
Min.: 1
Mult.: 1
|
|
Evaluation Boards
|
RF Amplifier
|
TQL9063
|
1.5 GHz to 4 GHz
|
|
|
|
RF Development Tools 50-4000MHz NF .66dB Eval Board
- TQP3M9035-PCB
- Qorvo
-
1:
167,18 €
-
3Expected 19/11/2026
|
Mouser Part No
772-TQP3M9035-PCB
|
Qorvo
|
RF Development Tools 50-4000MHz NF .66dB Eval Board
|
|
3Expected 19/11/2026
|
|
Min.: 1
Mult.: 1
|
|
Evaluation Boards
|
RF Amplifier
|
TQP3M9035
|
50 MHz to 4 GHz
|
|
|
|
RF Development Tools 2110-2170MHZ 5VOLT EVAL BOARD
- TQP7M9104-PCB2140
- Qorvo
-
1:
237,60 €
-
4Expected 26/11/2026
|
Mouser Part No
772-TQP7M9104PCB2140
|
Qorvo
|
RF Development Tools 2110-2170MHZ 5VOLT EVAL BOARD
|
|
4Expected 26/11/2026
|
|
Min.: 1
Mult.: 1
|
|
Evaluation Boards
|
RF Amplifier
|
TQP7M9104
|
2.11 GHz to 2.17 GHz
|
|
|
|
RF Development Tools SP4T, High Iso, Absorptive, 50ohm RF Switch Eval. Board
- EK42441-04
- pSemi
-
1:
79,12 €
-
7Expected 23/12/2026
|
Mouser Part No
81-EK42441-04
|
pSemi
|
RF Development Tools SP4T, High Iso, Absorptive, 50ohm RF Switch Eval. Board
|
|
7Expected 23/12/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
|
RF Development Tools The EVAL-BTL-0012 is a connectorized evaluation board for the BTL-0012 Miniature surface mount 0.0005 - 12 GHz Bias-Tee.
Marki Microwave EVAL-BTL-0012
- EVAL-BTL-0012
- Marki Microwave
-
1:
472,72 €
-
1Expected 23/09/2026
-
New At Mouser
|
Mouser Part No
10-EVAL-BTL-0012
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVAL-BTL-0012 is a connectorized evaluation board for the BTL-0012 Miniature surface mount 0.0005 - 12 GHz Bias-Tee.
|
|
1Expected 23/09/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
|
RF Development Tools This is the evaluation board for the ABDS-10170PSM - a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB differential to single ended gain (low end limited by DC block).
Marki Microwave EVB-ABDS-10170P
- EVB-ABDS-10170P
- Marki Microwave
-
1:
598,69 €
-
1Expected 16/09/2026
-
New Product
|
Mouser Part No
10-EVB-ABDS-10170P
New Product
|
Marki Microwave
|
RF Development Tools This is the evaluation board for the ABDS-10170PSM - a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB differential to single ended gain (low end limited by DC block).
|
|
1Expected 16/09/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
|
RF Development Tools The EVB-MFBC-00004 is a connectorized evaluation board for the MFBC-00004CSP3 passive MMIC surface mount 15-19.8GHz bandpass filter.
Marki Microwave EVB-MFBC-00004
- EVB-MFBC-00004
- Marki Microwave
-
1:
598,69 €
-
1Expected 09/10/2026
-
New Product
|
Mouser Part No
10-EVB-MFBC-00004
New Product
|
Marki Microwave
|
RF Development Tools The EVB-MFBC-00004 is a connectorized evaluation board for the MFBC-00004CSP3 passive MMIC surface mount 15-19.8GHz bandpass filter.
|
|
1Expected 09/10/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
|
RF Development Tools The EVB-MPD-0222S is a connectorized evaluation board for the MPD-0222SCSP2 MMIC 2-22GHz 2-Way power divider/power splitter.
Marki Microwave EVB-MPD-0222S
- EVB-MPD-0222S
- Marki Microwave
-
1:
498,07 €
-
1Expected 02/10/2026
-
New Product
|
Mouser Part No
10-EVB-MPD-0222S
New Product
|
Marki Microwave
|
RF Development Tools The EVB-MPD-0222S is a connectorized evaluation board for the MPD-0222SCSP2 MMIC 2-22GHz 2-Way power divider/power splitter.
|
|
1Expected 02/10/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
|
RF Development Tools EVAL BOARD FOR JEBT-4R2GW+
Mini-Circuits TB-JEBT-4R2GW+
- TB-JEBT-4R2GW+
- Mini-Circuits
-
1:
170,94 €
-
4Expected 26/10/2026
|
Mouser Part No
139-TB-JEBT-4R2GW+
|
Mini-Circuits
|
RF Development Tools EVAL BOARD FOR JEBT-4R2GW+
|
|
4Expected 26/10/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
|
RF Development Tools B140MB4S EVAL BOARD
- DEB-B140MB4S
- Knowles Dielectric Labs
-
1:
447,20 €
-
1Expected 12/03/2027
-
New Product
|
Mouser Part No
766-DEB-B140MB4S
New Product
|
Knowles Dielectric Labs
|
RF Development Tools B140MB4S EVAL BOARD
|
|
1Expected 12/03/2027
|
|
Min.: 1
Mult.: 1
|
|
Evaluation Boards
|
Band Pass Filter
|
B140MB4S
|
13.75 GHz to 14.5 GHz
|
|
|
|
RF Development Tools ADP12055 EVAL BOARD
- DEB12055
- Knowles Dielectric Labs
-
1:
903,30 €
-
1Expected 04/12/2026
-
New Product
|
Mouser Part No
766-DEB12055
New Product
|
Knowles Dielectric Labs
|
RF Development Tools ADP12055 EVAL BOARD
|
|
1Expected 04/12/2026
|
|
Min.: 1
Mult.: 1
|
|
Evaluation Boards
|
RF Diplexer
|
ADP12055
|
10.7 GHz to 12.75 GHz
|
|
|
|
RF Development Tools 2 DNT24P radios installed in DNT24 interface boards, labeled Base and Remote
- DNT24DK
- Murata Electronics
-
Restricted Availability
-
NRND
|
Mouser Part No
725-DNT24DK
NRND
|
Murata Electronics
|
RF Development Tools 2 DNT24P radios installed in DNT24 interface boards, labeled Base and Remote
|
|
|
|
|
|
Development Kits
|
RF Transceiver
|
DNT24
|
2.4 GHz
|
|
|
|
RF Development Tools The EVAL-AMM-7199SM is a connectorized evaluation board for the AMM-7199SM surface mount 11-38 GHz LO driver amplifier.
- EVAL-AMM-7199SM
- Marki Microwave
-
1:
472,72 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVAL-AMM-7199SM
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVAL-AMM-7199SM is a connectorized evaluation board for the AMM-7199SM surface mount 11-38 GHz LO driver amplifier.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
|
RF Development Tools The EVAL-AMM-7200SM is a connectorized evaluation board for the AMM-7200SM surface mount 12-46 GHz LO driver amplifier.
- EVAL-AMM-7200SM
- Marki Microwave
-
1:
524,88 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVAL-AMM-7200SM
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVAL-AMM-7200SM is a connectorized evaluation board for the AMM-7200SM surface mount 12-46 GHz LO driver amplifier.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
|
RF Development Tools The EVAL-AMM-7210SM is a connectorized evaluation board for the AMM-7210SM surface mount 25-50 GHz LO driver amplifier.
- EVAL-AMM-7210SM
- Marki Microwave
-
1:
492,28 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVAL-AMM-7210SM
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVAL-AMM-7210SM is a connectorized evaluation board for the AMM-7210SM surface mount 25-50 GHz LO driver amplifier.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
|
RF Development Tools The EVAL-APM-6849SM is a connectorized evaluation board for the APM-6849SM Low Phase Noise surface mount 2 30 GHz Amplifier.
- EVAL-APM-6849SM
- Marki Microwave
-
1:
646,58 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVAL-APM-6849SM
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVAL-APM-6849SM is a connectorized evaluation board for the APM-6849SM Low Phase Noise surface mount 2 30 GHz Amplifier.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
|
RF Development Tools The EVAL-APM-7099SM is a connectorized evaluation board for the APM-7099SM surface mount 0.01-20 GHz low phase noise amplifier.
- EVAL-APM-7099SM
- Marki Microwave
-
1:
646,58 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVAL-APM-7099SM
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVAL-APM-7099SM is a connectorized evaluation board for the APM-7099SM surface mount 0.01-20 GHz low phase noise amplifier.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
|
RF Development Tools The EVAL-BAL-0003 is a connectorized evaluation board for the BAL-0003 High Power surface mount 0.0005 - 3 GHz Balun.
- EVAL-BAL-0003
- Marki Microwave
-
1:
570,52 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVAL-BAL-0003
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVAL-BAL-0003 is a connectorized evaluation board for the BAL-0003 High Power surface mount 0.0005 - 3 GHz Balun.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
|
RF Development Tools The EVAL-BAL-0012 is a connectorized evaluation board for the BAL-0012 surface mount 0.01 - 12 GHz Balun.
- EVAL-BAL-0012
- Marki Microwave
-
1:
755,25 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVAL-BAL-0012
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVAL-BAL-0012 is a connectorized evaluation board for the BAL-0012 surface mount 0.01 - 12 GHz Balun.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
|
RF Development Tools The EVAL-DLM-10 is a connectorized evaluation board for the DLM-10SM is a tunable, dual channel GaAs Schottky diode signal limiter featuring excellent IP3, insertion loss, and return loss.
- EVAL-DLM-10
- Marki Microwave
-
1:
324,92 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVAL-DLM-10
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVAL-DLM-10 is a connectorized evaluation board for the DLM-10SM is a tunable, dual channel GaAs Schottky diode signal limiter featuring excellent IP3, insertion loss, and return loss.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
|
RF Development Tools The EVAL-HLM-40P is a connectorized evaluation board for the HLM-40PSM DC-40 GHz surface mount amplifier.
- EVAL-HLM-40P
- Marki Microwave
-
1:
385,13 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVAL-HLM-40P
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVAL-HLM-40P is a connectorized evaluation board for the HLM-40PSM DC-40 GHz surface mount amplifier.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
|
RF Development Tools The EVAL-MBAL-0104 is a connectorized evaluation board for the MBAL-0104SM is a GaAs passive MMIC 1-4 GHz balun in a 4mm QFN surface mount package.
- EVAL-MBAL-0104
- Marki Microwave
-
1:
429,25 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVAL-MBAL-0104
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVAL-MBAL-0104 is a connectorized evaluation board for the MBAL-0104SM is a GaAs passive MMIC 1-4 GHz balun in a 4mm QFN surface mount package.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
|
RF Development Tools The EVAL-MBAL-0220 is a connectorized evaluation board for the MBAL-0220SM passive MMIC Surface mount 2 - 20 GHz Balun.
- EVAL-MBAL-0220
- Marki Microwave
-
1:
646,58 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVAL-MBAL-0220
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVAL-MBAL-0220 is a connectorized evaluation board for the MBAL-0220SM passive MMIC Surface mount 2 - 20 GHz Balun.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
|
|
RF Development Tools The EVAL-MC16-0222 is a connectorized evaluation board for the MC16-0222SM MMIC 2-22 GHz Directional Coupler.
- EVAL-MC16-0222
- Marki Microwave
-
1:
755,25 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVAL-MC16-0222
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVAL-MC16-0222 is a connectorized evaluation board for the MC16-0222SM MMIC 2-22 GHz Directional Coupler.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
