|
|
RF Amplifier A wideband low noise amplifier capable of providing 13 dB gain and +26 dBm OIP3 with a low 2.2 dB typical noise figure. The AMM-9855PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
- AMM-9855PSM
- Marki Microwave
-
25:
39,51 €
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-AMM-9855PSM
New Product
|
Marki Microwave
|
RF Amplifier A wideband low noise amplifier capable of providing 13 dB gain and +26 dBm OIP3 with a low 2.2 dB typical noise figure. The AMM-9855PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 25
Mult.: 25
|
|
|
|
|
RF Amplifier The AMM-9856PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block. It can drive an L diode mixer up to 40 GHz or an H diode mixer up to 20 GHz.
- AMM-9856PSM
- Marki Microwave
-
25:
59,22 €
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-AMM-9856PSM
New Product
|
Marki Microwave
|
RF Amplifier The AMM-9856PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block. It can drive an L diode mixer up to 40 GHz or an H diode mixer up to 20 GHz.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 25
Mult.: 25
|
|
|
|
|
RF Amplifier A wideband low noise amplifier capable of providing 17 dB gain and +30 dBm OIP3 with a low 1.9 dB typical noise figure. The AMM-9858PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
- AMM-9858PSM
- Marki Microwave
-
25:
42,91 €
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-AMM-9858PSM
New Product
|
Marki Microwave
|
RF Amplifier A wideband low noise amplifier capable of providing 17 dB gain and +30 dBm OIP3 with a low 1.9 dB typical noise figure. The AMM-9858PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 25
Mult.: 25
|
|
|
|
|
RF Amplifier A wideband low noise amplifier capable of providing 15 dB gain and +28 dBm OIP3 with a low 1.9 dB typical noise figure. The AMM-9859PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
- AMM-9859PSM
- Marki Microwave
-
25:
35,76 €
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-AMM-9859PSM
New Product
|
Marki Microwave
|
RF Amplifier A wideband low noise amplifier capable of providing 15 dB gain and +28 dBm OIP3 with a low 1.9 dB typical noise figure. The AMM-9859PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 25
Mult.: 25
|
|
|
|
|
RF Amplifier A wideband low noise amplifier capable of providing 13.5 dB gain and +28 dBm OIP3 with a low 2.7 dB typical noise figure. The AMM-9860PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
- AMM-9860PSM
- Marki Microwave
-
25:
37,48 €
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-AMM-9860PSM
New Product
|
Marki Microwave
|
RF Amplifier A wideband low noise amplifier capable of providing 13.5 dB gain and +28 dBm OIP3 with a low 2.7 dB typical noise figure. The AMM-9860PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 25
Mult.: 25
|
|
|
|
|
RF Amplifier A wideband low noise amplifier capable of providing 11.7 dB gain and +24 dBm OIP3 with a low 2.5 dB typical noise figure. The AMM-9861PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
- AMM-9861PSM
- Marki Microwave
-
25:
40,24 €
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-AMM-9861PSM
New Product
|
Marki Microwave
|
RF Amplifier A wideband low noise amplifier capable of providing 11.7 dB gain and +24 dBm OIP3 with a low 2.5 dB typical noise figure. The AMM-9861PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 25
Mult.: 25
|
|
|
|
|
RF Amplifier A wideband gain block capable of providing 10 dB gain and +23 dBm OIP3 with a low 3.4 dB typical noise figure. The AMM-9862PSM is an ideal linear signal amplifier for applications requiring low gain, low power consumption and small form-factors.
- AMM-9862PSM
- Marki Microwave
-
25:
57,88 €
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-AMM-9862PSM
New Product
|
Marki Microwave
|
RF Amplifier A wideband gain block capable of providing 10 dB gain and +23 dBm OIP3 with a low 3.4 dB typical noise figure. The AMM-9862PSM is an ideal linear signal amplifier for applications requiring low gain, low power consumption and small form-factors.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 25
Mult.: 25
|
|
|
|
|
RF Amplifier The APM-7098SM is a broadband low phase noise LO driver amplifier designed to provide a saturated +23 dBm output power with low DC power consumption.
- APM-7098SM
- Marki Microwave
-
25:
95,84 €
-
Non-Stocked Lead-Time 10 Weeks
|
Mouser Part No
10-APM-7098SM
|
Marki Microwave
|
RF Amplifier The APM-7098SM is a broadband low phase noise LO driver amplifier designed to provide a saturated +23 dBm output power with low DC power consumption.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 25
Mult.: 25
|
|
|
|
|
RF Amplifier The APM-7099SM is a broadband low phase noise driver amplifier designed to provide a saturated +25 dBm output power with low DC power consumption.
- APM-7099SM
- Marki Microwave
-
1:
107,11 €
-
Non-Stocked Lead-Time 10 Weeks
-
New At Mouser
|
Mouser Part No
10-APM-7099SM
New At Mouser
|
Marki Microwave
|
RF Amplifier The APM-7099SM is a broadband low phase noise driver amplifier designed to provide a saturated +25 dBm output power with low DC power consumption.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Amplifier The APM-7516PSM is a broadband low phase noise driver amplifier designed to provide enough power to drive the LO port of an H or L-diode mixer with a range of input powers.
- APM-7516PSM
- Marki Microwave
-
1:
48,79 €
-
Non-Stocked Lead-Time 10 Weeks
-
New At Mouser
|
Mouser Part No
10-APM-7516PSM
New At Mouser
|
Marki Microwave
|
RF Amplifier The APM-7516PSM is a broadband low phase noise driver amplifier designed to provide enough power to drive the LO port of an H or L-diode mixer with a range of input powers.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Attenuators The ATN00-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN00-0070CSP1 features a typical 0.3 dB attenuation with 0.1 dB attenuation flatness and 20 dB return loss across the DC-70 GHz bandwidth.
- ATN00-0070CSP1
- Marki Microwave
-
1:
17,86 €
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-ATN00-0070CSP1
New Product
|
Marki Microwave
|
Attenuators The ATN00-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN00-0070CSP1 features a typical 0.3 dB attenuation with 0.1 dB attenuation flatness and 20 dB return loss across the DC-70 GHz bandwidth.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Attenuators The ATN01-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN01-0070CSP1 features a typical 1.3 dB attenuation with 0.2 dB attenuation flatness and 23 dB return loss across the DC-70 GHz bandwidth.
- ATN01-0070CSP1
- Marki Microwave
-
1:
16,91 €
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-ATN01-0070CSP1
New Product
|
Marki Microwave
|
Attenuators The ATN01-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN01-0070CSP1 features a typical 1.3 dB attenuation with 0.2 dB attenuation flatness and 23 dB return loss across the DC-70 GHz bandwidth.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Attenuators The ATN03-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN03-0070CSP1 features a typical 3.2 dB attenuation with 0.1 dB attenuation flatness and 22 dB return loss across the DC-70 GHz bandwidth.
- ATN03-0070CSP1
- Marki Microwave
-
1:
17,86 €
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-ATN03-0070CSP1
New Product
|
Marki Microwave
|
Attenuators The ATN03-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN03-0070CSP1 features a typical 3.2 dB attenuation with 0.1 dB attenuation flatness and 22 dB return loss across the DC-70 GHz bandwidth.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Attenuators The ATN04-0040PSM is a surface mount GaAs MMIC 4dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
- ATN04-0040PSM
- Marki Microwave
-
1:
15,64 €
-
Non-Stocked Lead-Time 10 Weeks
-
New At Mouser
|
Mouser Part No
10-ATN04-0040PSM
New At Mouser
|
Marki Microwave
|
Attenuators The ATN04-0040PSM is a surface mount GaAs MMIC 4dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Attenuators The ATN04-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN04-0070CSP1 features a typical 4.1 dB attenuation with 0.2 dB attenuation flatness and 22 dB return loss across the DC-70 GHz bandwidth.
- ATN04-0070CSP1
- Marki Microwave
-
1:
16,91 €
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-ATN04-0070CSP1
New Product
|
Marki Microwave
|
Attenuators The ATN04-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN04-0070CSP1 features a typical 4.1 dB attenuation with 0.2 dB attenuation flatness and 22 dB return loss across the DC-70 GHz bandwidth.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Attenuators The ATN05-0040PSM is a surface mount GaAs MMIC 5dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
- ATN05-0040PSM
- Marki Microwave
-
1:
15,64 €
-
Non-Stocked Lead-Time 10 Weeks
-
New At Mouser
|
Mouser Part No
10-ATN05-0040PSM
New At Mouser
|
Marki Microwave
|
Attenuators The ATN05-0040PSM is a surface mount GaAs MMIC 5dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Attenuators The ATN05-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN05-0070CSP1 features a typical 5.2 dB attenuation with 0.2 dB attenuation flatness and 24 dB return loss across the DC-70 GHz bandwidth.
- ATN05-0070CSP1
- Marki Microwave
-
1:
16,91 €
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-ATN05-0070CSP1
New Product
|
Marki Microwave
|
Attenuators The ATN05-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN05-0070CSP1 features a typical 5.2 dB attenuation with 0.2 dB attenuation flatness and 24 dB return loss across the DC-70 GHz bandwidth.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Attenuators The ATN06-0040PSM is a surface mount GaAs MMIC 6dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
- ATN06-0040PSM
- Marki Microwave
-
1:
15,64 €
-
Non-Stocked Lead-Time 10 Weeks
-
New At Mouser
|
Mouser Part No
10-ATN06-0040PSM
New At Mouser
|
Marki Microwave
|
Attenuators The ATN06-0040PSM is a surface mount GaAs MMIC 6dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Attenuators The ATN07-0040PSM is a surface mount GaAs MMIC 7dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
- ATN07-0040PSM
- Marki Microwave
-
1:
15,64 €
-
Non-Stocked Lead-Time 10 Weeks
-
New At Mouser
|
Mouser Part No
10-ATN07-0040PSM
New At Mouser
|
Marki Microwave
|
Attenuators The ATN07-0040PSM is a surface mount GaAs MMIC 7dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Attenuators The ATN07-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN07-0070CSP1 features a typical 7.1 dB attenuation with 0.2 dB attenuation flatness and 21 dB return loss across the operational bandwidth.
- ATN07-0070CSP1
- Marki Microwave
-
1:
16,91 €
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-ATN07-0070CSP1
New Product
|
Marki Microwave
|
Attenuators The ATN07-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN07-0070CSP1 features a typical 7.1 dB attenuation with 0.2 dB attenuation flatness and 21 dB return loss across the operational bandwidth.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Attenuators The ATN08-0040PSM is a surface mount GaAs MMIC 8dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
- ATN08-0040PSM
- Marki Microwave
-
1:
15,64 €
-
Non-Stocked Lead-Time 10 Weeks
-
New At Mouser
|
Mouser Part No
10-ATN08-0040PSM
New At Mouser
|
Marki Microwave
|
Attenuators The ATN08-0040PSM is a surface mount GaAs MMIC 8dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Attenuators The ATN08-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN08-0070CSP1 features a typical 8.2 dB attenuation with 0.2 dB attenuation flatness and 22 dB return loss across the DC-70 GHz bandwidth.
- ATN08-0070CSP1
- Marki Microwave
-
1:
16,91 €
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-ATN08-0070CSP1
New Product
|
Marki Microwave
|
Attenuators The ATN08-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN08-0070CSP1 features a typical 8.2 dB attenuation with 0.2 dB attenuation flatness and 22 dB return loss across the DC-70 GHz bandwidth.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Attenuators The ATN09-0040PSM is a surface mount GaAs MMIC 9dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
- ATN09-0040PSM
- Marki Microwave
-
1:
15,64 €
-
Non-Stocked Lead-Time 10 Weeks
-
New At Mouser
|
Mouser Part No
10-ATN09-0040PSM
New At Mouser
|
Marki Microwave
|
Attenuators The ATN09-0040PSM is a surface mount GaAs MMIC 9dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Attenuators The ATN09-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN09-0070CSP1 features a typical 9.1 dB attenuation with 0.1 dB attenuation flatness and 20 dB return loss across the DC-70 GHz bandwidth.
- ATN09-0070CSP1
- Marki Microwave
-
1:
16,91 €
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-ATN09-0070CSP1
New Product
|
Marki Microwave
|
Attenuators The ATN09-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN09-0070CSP1 features a typical 9.1 dB attenuation with 0.1 dB attenuation flatness and 20 dB return loss across the DC-70 GHz bandwidth.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Attenuators The ATN10-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN10-0070CSP1 features a typical 10.2 dB attenuation with 0.2 dB attenuation flatness and 23 dB return loss across the DC-70 GHz bandwidth.
- ATN10-0070CSP1
- Marki Microwave
-
1:
17,86 €
-
Non-Stocked Lead-Time 10 Weeks
-
New Product
|
Mouser Part No
10-ATN10-0070CSP1
New Product
|
Marki Microwave
|
Attenuators The ATN10-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN10-0070CSP1 features a typical 10.2 dB attenuation with 0.2 dB attenuation flatness and 23 dB return loss across the DC-70 GHz bandwidth.
|
|
Non-Stocked Lead-Time 10 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
