Texas Instruments F29H85x, F29P58x, & F29P32x Real-Time MCUs
Texas Instruments F29H85x, F29P58x, and F29P32x Real-Time MCUs combine C29x 64-bit processing with high-performance real-time control, DSP, and general-purpose processing capabilities. The family integrates ECC-protected memory, functional safety features, advanced security, high-resolution control peripherals, analog functions, and extensive communications interfaces.
The TI real-time MCUs provide integrated hardware for demanding control systems, including ADCs, PWM channels, capture modules, encoder interfaces, CAN FD, SPI, UART, I²C, EtherCAT®, and FSI connectivity. Functional safety and security capabilities support automotive and industrial designs. Applications include on-board chargers, HEV/EV DC/DC converters, powertrain integration, electric power steering, traction inverters, commercial HVAC motor control, and automated sorting equipment.
Features
- C29x 64-bit CPU architecture
- High-performance real-time control with low latency
- High-performance DSP and general-purpose processing capabilities
- VLIW CPU executes 1 to 8 instructions in parallel
- Fully protected pipeline
- IEEE 32-bit and 64-bit floating-point operations
- 32-bit and 64-bit trigonometric operations
- Hardware interrupt prioritization and nesting
- Atomic operations with memory protection
- ECC-protected memory architecture
- Firmware Over the Air support with A/B swap and LFU
- Built-in ECC logic for system-wide safety
- Functional Safety-Compliant targeted
- Developed for functional safety applications
- Documentation to aid ISO 26262 and IEC 61508 system design will be available upon production release
- Systematic capability up to ASIL D and SIL 3 targeted
- Hardware capability up to ASIL D and SIL 3 targeted
- Hardware Security Module
- Independently running Arm® Cortex®-M4-based security controller subsystem
- Secure key storage
- Secure BOOT
- Secure Debug
- EVITA-full support
- FOTA with A/B swap
- Hardware cryptographic accelerators
- Safety-related certification
- ISO 26262 certification up to ASIL D and IEC 61508 SIL 3 by TÜV SÜD planned
- Safety and Security Unit
- Advanced real-time safety and security
- Power-on self-test capability
- FOTA and LFU support with rollback control
- Advanced analog subsystem
- Hardware post-processing of conversions
- Hardware oversampling and undersampling modes
- ADC safety checkers
- Advanced control peripherals
- High-resolution PWM capability
- Enhanced capture modules
- Enhanced quadrature encoder pulse modules
- Sigma-delta filter modules
- Configurable Logic Block
- Extensive communications support
- EtherCAT Subordinate Device Controller
- Fast Serial Interface
- SPI
- UART
- I²C
- LIN
- PMBus
- SENT
- CAN FD/MCAN
Applications
- Onboard chargers (OBC) with or without host integration
- HEV/EV DC/DC converters
- Electric power steering (EPS)
- Traction inverters
- Medium- and short-range radar
- HVAC large commercial motor control
- Automated sorting equipment
- Central inverters
- CNC control
- String inverters
- Inverters and motor control
- Linear motor segment controllers
- Servo drive control modules
- Industrial AC-DC
- Three-phase UPS
- Merchant networks and server PSUs
Specifications
- Up to three C29x 64-bit CPUs running at 200MHz
- 4MB of CPU-mappable flash
- 256KB of data-only flash
- 452KB of RAM
- Dedicated 512KB flash and 40KB RAM for HSM
- Five analog-to-digital converters
- Two 16-bit ADCs at 1.19MSPS each
- Three 12-bit ADCs at 3.92MSPS each
- Up to 80 single-ended or 16 differential inputs
- 40 redundant input channels
- Hardware oversampling of up to 128x
- Two 12-bit buffered DAC outputs
- 36 PWM channels with high-resolution capability
- Six enhanced capture modules
- Six enhanced quadrature encoder pulse modules
- 16 sigma-delta filter module input channels
- Five SPI ports operating at up to 50MHz
- Six high-speed UARTs
- Two I²C interfaces
- Two LIN interfaces
- Six SENT interfaces
- Six CAN FD/MCAN interfaces
- Two 10-channel RTDMA controllers
- Up to 190 usable signal pins
- 136 GPIO pins
- 80 analog pins
- 1.25V core and 3.3V I/O design
- Ambient operating temperature range of -40°C to +125°C
- 256-ball nFBGA package
- Package dimensions of 13mm x 13mm
- Ball pitch of 0.8mm
- 176-pin HTQFP package
- Package dimensions of 22mm x 22mm
- Pin pitch of 0.4mm
- 144-pin HTQFP package
- Package dimensions of 18mm x 18mm
- Pin pitch of 0.4mm
- 100-pin HTQFP package
- Package dimensions of 14mm x 14mm
Functional Block Diagram
Development Tools
Texas Instruments F29H85X Eval Board & Kit
For the TI C2000™ MCU series of F29H85x and/or F29P58x devices.
Texas Instruments HSEC180ADAPEVM Adapter Board for SOM
An 180-pin HSEC adapter for C2000 SOM platforms, providing backward compatibility with EVMs.
Texas Instruments XDS110ISO-EVM Isolated Plug-in Board
A real-time debug and flash programming configuration for C2000™ & Arm-based processor controlSOMs.
Texas Instruments TMDSHSECDOCK Baseboard Docking Station
Provides header pin access to key signals on compatible HSEC180-based controlCARDs.