|
|
RF Development Tools The EVAL-NLTL-6796 is a connectorized evaluation board for the NLTL-6796SM is a MMIC 0.5-3.5 GHz non-linear transmission line (NLTL) based comb generator.
- EVAL-NLTL-6796
- Marki Microwave
-
1:
755,25 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVAL-NLTL-6796
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVAL-NLTL-6796 is a connectorized evaluation board for the NLTL-6796SM is a MMIC 0.5-3.5 GHz non-linear transmission line (NLTL) based comb generator.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVAL-PBR-0003 is a connectorized evaluation board for the PBR-0003SMG surface mount 10 MHz to 3 GHz high isolation power divider.
- EVAL-PBR-0003
- Marki Microwave
-
1:
646,58 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVAL-PBR-0003
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVAL-PBR-0003 is a connectorized evaluation board for the PBR-0003SMG surface mount 10 MHz to 3 GHz high isolation power divider.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVAL-PBR-0006 is a connectorized evaluation board for the PBR-0006SMG surface mount 10 MHz to 6 GHz high isolation power divider.
- EVAL-PBR-0006
- Marki Microwave
-
1:
755,25 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVAL-PBR-0006
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVAL-PBR-0006 is a connectorized evaluation board for the PBR-0006SMG surface mount 10 MHz to 6 GHz high isolation power divider.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVAL-PBR-0012 is a connectorized evaluation board for the PBR-0012SMG surface mount 10 MHz to 3 GHz high isolation power divider.
- EVAL-PBR-0012
- Marki Microwave
-
1:
972,60 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVAL-PBR-0012
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVAL-PBR-0012 is a connectorized evaluation board for the PBR-0012SMG surface mount 10 MHz to 3 GHz high isolation power divider.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools This is the evaluation board for the ABDS-10170PSM - a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB differential to single ended gain (low end limited by DC block).
- EVB-ABDS-10170P
- Marki Microwave
-
1:
598,69 €
-
Non-Stocked Lead-Time 2 Weeks
-
New Product
|
Mouser Part No
10-EVB-ABDS-10170P
New Product
|
Marki Microwave
|
RF Development Tools This is the evaluation board for the ABDS-10170PSM - a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB differential to single ended gain (low end limited by DC block).
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools This is the evaluation board for the ABSD-10169PSM - a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB single ended to differential gain (low end limited by DC block).
- EVB-ABSD-10169P
- Marki Microwave
-
1:
598,69 €
-
Non-Stocked Lead-Time 2 Weeks
-
New Product
|
Mouser Part No
10-EVB-ABSD-10169P
New Product
|
Marki Microwave
|
RF Development Tools This is the evaluation board for the ABSD-10169PSM - a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB single ended to differential gain (low end limited by DC block).
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVB-AKA-1300P is a connectorized evaluation board for the AKA-1300PSM is a low-cost, cascadable broadband InGaP HBT amplifier.
- EVB-AKA-1300P
- Marki Microwave
-
1:
598,69 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVB-AKA-1300P
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVB-AKA-1300P is a connectorized evaluation board for the AKA-1300PSM is a low-cost, cascadable broadband InGaP HBT amplifier.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVB-AKA-1310P is a connectorized evaluation board for the AKA-1310PSM is a low-cost, cascadable broadband InGaP HBT amplifier.
- EVB-AKA-1310P
- Marki Microwave
-
1:
598,69 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVB-AKA-1310P
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVB-AKA-1310P is a connectorized evaluation board for the AKA-1310PSM is a low-cost, cascadable broadband InGaP HBT amplifier.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVB-AKA-1400P is a connectorized evaluation board for the AKA-1400PSM Broadband InGaP SMT surface mount DC 14 GHz Amplifier.
- EVB-AKA-1400P
- Marki Microwave
-
1:
598,69 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVB-AKA-1400P
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVB-AKA-1400P is a connectorized evaluation board for the AKA-1400PSM Broadband InGaP SMT surface mount DC 14 GHz Amplifier.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVB-AKA-1500P is a connectorized evaluation board for the AKA-1500PSM Broadband InGaP SMT surface mount DC 14 GHz Amplifier.
- EVB-AKA-1500P
- Marki Microwave
-
1:
598,69 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVB-AKA-1500P
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVB-AKA-1500P is a connectorized evaluation board for the AKA-1500PSM Broadband InGaP SMT surface mount DC 14 GHz Amplifier.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools This is the evaluation board for the AMM-10202PSM. The AMM-10202PSM is a surface-mount LO driver amplifier that is designed to provide sufficient LO drive for an H or S diode mixer.
- EVB-AMM-10202P
- Marki Microwave
-
1:
598,69 €
-
Non-Stocked Lead-Time 2 Weeks
-
New Product
|
Mouser Part No
10-EVB-AMM-10202P
New Product
|
Marki Microwave
|
RF Development Tools This is the evaluation board for the AMM-10202PSM. The AMM-10202PSM is a surface-mount LO driver amplifier that is designed to provide sufficient LO drive for an H or S diode mixer.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools This is the evaluation board for the AMM-10220PSM. The AMM-10220PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block. It can drive an L or H diode mixer from 2 to 26 GHz.
- EVB-AMM-10220P
- Marki Microwave
-
1:
598,69 €
-
Non-Stocked Lead-Time 2 Weeks
-
New Product
|
Mouser Part No
10-EVB-AMM-10220P
New Product
|
Marki Microwave
|
RF Development Tools This is the evaluation board for the AMM-10220PSM. The AMM-10220PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block. It can drive an L or H diode mixer from 2 to 26 GHz.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVB-AMM-7473P is a connectorized evaluation board for the AMM-7473PSM 0.4-27 GHz surface mount amplifier.
- EVB-AMM-7473P
- Marki Microwave
-
1:
401,48 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVB-AMM-7473P
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVB-AMM-7473P is a connectorized evaluation board for the AMM-7473PSM 0.4-27 GHz surface mount amplifier.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVB-AMM-8211P is a connectorized evaluation board for the AMM-8211PSM surface mount 22-57 GHz GaAs LO driver amplifier
- EVB-AMM-8211P
- Marki Microwave
-
1:
598,69 €
-
Non-Stocked Lead-Time 2 Weeks
-
New Product
|
Mouser Part No
10-EVB-AMM-8211P
New Product
|
Marki Microwave
|
RF Development Tools The EVB-AMM-8211P is a connectorized evaluation board for the AMM-8211PSM surface mount 22-57 GHz GaAs LO driver amplifier
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools This is the evaluation board for the AMM-9619PSM. The AMM-9619PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block. It can drive an L or H diode mixer from 2 to 26 GHz.
- EVB-AMM-9619P
- Marki Microwave
-
1:
598,69 €
-
Non-Stocked Lead-Time 2 Weeks
-
New Product
|
Mouser Part No
10-EVB-AMM-9619P
New Product
|
Marki Microwave
|
RF Development Tools This is the evaluation board for the AMM-9619PSM. The AMM-9619PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block. It can drive an L or H diode mixer from 2 to 26 GHz.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools This is the evaluation board for the AMM-9853PSM. This version is designed to be used with external bias tees. The AMM-9853PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block.
- EVB-AMM-9853P-1
- Marki Microwave
-
1:
598,69 €
-
Non-Stocked Lead-Time 2 Weeks
-
New Product
|
Mouser Part No
10-EVB-AMM-9853P-1
New Product
|
Marki Microwave
|
RF Development Tools This is the evaluation board for the AMM-9853PSM. This version is designed to be used with external bias tees. The AMM-9853PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools This is the evaluation board for the AMM-9854PSM. This version is designed to be used with external bias tees. The AMM-9854PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block.
- EVB-AMM-9854P-1
- Marki Microwave
-
1:
598,69 €
-
Non-Stocked Lead-Time 2 Weeks
-
New Product
|
Mouser Part No
10-EVB-AMM-9854P-1
New Product
|
Marki Microwave
|
RF Development Tools This is the evaluation board for the AMM-9854PSM. This version is designed to be used with external bias tees. The AMM-9854PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools This is the evaluation board for the AMM-9855PSM. This version is designed to be used with external bias tees. The AMM-9855PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block.
- EVB-AMM-9855P-1
- Marki Microwave
-
1:
598,69 €
-
Non-Stocked Lead-Time 2 Weeks
-
New Product
|
Mouser Part No
10-EVB-AMM-9855P-1
New Product
|
Marki Microwave
|
RF Development Tools This is the evaluation board for the AMM-9855PSM. This version is designed to be used with external bias tees. The AMM-9855PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools This is the evaluation board for the AMM-9858PSM. The AMM-9858PSM is a wideband low noise amplifier capable of providing 17 dB gain and +30 dBm OIP3 with a low 1.9 dB typical noise figure.
- EVB-AMM-9858P
- Marki Microwave
-
1:
598,69 €
-
Non-Stocked Lead-Time 2 Weeks
-
New Product
|
Mouser Part No
10-EVB-AMM-9858P
New Product
|
Marki Microwave
|
RF Development Tools This is the evaluation board for the AMM-9858PSM. The AMM-9858PSM is a wideband low noise amplifier capable of providing 17 dB gain and +30 dBm OIP3 with a low 1.9 dB typical noise figure.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools This is the evaluation board for the AMM-9859PSM. The AMM-9859PSM is a wideband low noise amplifier capable of providing 15 dB gain and +28 dBm OIP3 with a low 1.9 dB typical noise figure.
- EVB-AMM-9859P
- Marki Microwave
-
1:
598,69 €
-
Non-Stocked Lead-Time 2 Weeks
-
New Product
|
Mouser Part No
10-EVB-AMM-9859P
New Product
|
Marki Microwave
|
RF Development Tools This is the evaluation board for the AMM-9859PSM. The AMM-9859PSM is a wideband low noise amplifier capable of providing 15 dB gain and +28 dBm OIP3 with a low 1.9 dB typical noise figure.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools This is the evaluation board for the AMM-9860PSM. The AMM-9860PSM is a wideband low noise amplifier capable of providing 13.5 dB gain and +28 dBm OIP3 with a low 2.7 dB typical noise figure.
- EVB-AMM-9860P
- Marki Microwave
-
1:
598,69 €
-
Non-Stocked Lead-Time 2 Weeks
-
New Product
|
Mouser Part No
10-EVB-AMM-9860P
New Product
|
Marki Microwave
|
RF Development Tools This is the evaluation board for the AMM-9860PSM. The AMM-9860PSM is a wideband low noise amplifier capable of providing 13.5 dB gain and +28 dBm OIP3 with a low 2.7 dB typical noise figure.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools This is the evaluation board for the AMM-9861PSM. The AMM-9861PSM is a wideband low noise amplifier capable of providing 11.7 dB gain and +24 dBm OIP3 with a low 2.5 dB typical noise figure.
- EVB-AMM-9861P
- Marki Microwave
-
1:
598,69 €
-
Non-Stocked Lead-Time 2 Weeks
-
New Product
|
Mouser Part No
10-EVB-AMM-9861P
New Product
|
Marki Microwave
|
RF Development Tools This is the evaluation board for the AMM-9861PSM. The AMM-9861PSM is a wideband low noise amplifier capable of providing 11.7 dB gain and +24 dBm OIP3 with a low 2.5 dB typical noise figure.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools This is the evaluation board for the AMM-9862PSM. The AMM-9862PSM is a wideband gain block capable of providing 10 dB gain and +23 dBm OIP3 with a low 3.4 dB typical noise figure.
- EVB-AMM-9862P
- Marki Microwave
-
1:
598,69 €
-
Non-Stocked Lead-Time 2 Weeks
-
New Product
|
Mouser Part No
10-EVB-AMM-9862P
New Product
|
Marki Microwave
|
RF Development Tools This is the evaluation board for the AMM-9862PSM. The AMM-9862PSM is a wideband gain block capable of providing 10 dB gain and +23 dBm OIP3 with a low 3.4 dB typical noise figure.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVB-APM-7516PSM is a connectorized evaluation board for the APM-7516PSM Low Phase Noise surface mount 1.5-20 GHz Amplifier.
- EVB-APM-7516PSM
- Marki Microwave
-
1:
598,69 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVB-APM-7516PSM
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVB-APM-7516PSM is a connectorized evaluation board for the APM-7516PSM Low Phase Noise surface mount 1.5-20 GHz Amplifier.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Development Tools The EVB-ATN00-0040P is a connectorized evaluation board for the ATN00-0040PSM DFN packaged surface mount DC-40GHz 0dB Attenuator.
- EVB-ATN00-0040P
- Marki Microwave
-
1:
553,41 €
-
Non-Stocked Lead-Time 2 Weeks
-
New At Mouser
|
Mouser Part No
10-EVB-ATN00-0040P
New At Mouser
|
Marki Microwave
|
RF Development Tools The EVB-ATN00-0040P is a connectorized evaluation board for the ATN00-0040PSM DFN packaged surface mount DC-40GHz 0dB Attenuator.
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
Finland
