New Embedded Solutions

Teltonika RUT286 Industrial Global LTE Cat 4 Routers are designed for global Internet of Things (IoT) and machine-to-machine (M2M) applications. These Teltonika routers provide reliable connectivity with 3G/2G fallback via a standardized LTE platform utilizing a Telit modem. The RUT286 features RS232 and RS485 serial interfaces with support for Modbus, DNP3, DLMS, and other core industrial protocols. Flexible power options include a protected 9VDC to 57VDC two-pin industrial input and active or passive Power over Ethernet (PoE). These power options enable simple installations with power and data over Ethernet.
-
Espressif Systems ESP32-P4X-EYE Vision Development BoardThis development board is based on the ESP32-P4 chip and mainly targets camera applications.5.6.2026 -
Teltonika RUTX11 LTE Cat 6 RouterCombines LTE Cat 6 connectivity, dual SIM switching, and four Gigabit Ethernet ports.5.6.2026 -
Teltonika RUT286 Industrial Global LTE Cat 4 RoutersDesigned for global Internet of Things (IoT) and machine-to-machine (M2M) applications.5.6.2026 -
M5Stack Atom-Matrix v1.1 IMU SensorImproves attitude detection accuracy and response speed compared to the previous generation.5.6.2026 -
M5Stack Unit NFC Near-Field Communication Read/Write UnitOperates at 13.56MHz and features a ST25R3916 high-performance NFC front-end IC.4.6.2026 -
M5Stack Core2 v1.3 Integrated ControllerESP32-D0WDQ6-V3 core with an Xtensa dual-core 32-bit LX6 processor running at 240MHz.4.6.2026 -
Infineon Technologies REF_11KW_PFC_SIC_QD Reference BoardRepresents a multilevel active-neutral-point-clamped (ANPC) bi-directional converter.4.6.2026 -
Macronix MX25L3233F MXSMIO® NOR Flash MemoryProvides sequential read operations across the entire chip and multi-I/O features.4.6.2026 -
Mikroe 150PD TPS Pressure ClickFeatures the TE Connectivity TPS-150PD-CA1N-00-T low-pressure MEMS pressure sensor.4.6.2026 -
M5Stack Atomic Audio-3.5 BaseVoice recognition and audio playback base built for the Atom series controllers.2.6.2026 -
Mikroe Life Metrics ClickCompact add-on board for multi-vital sign monitoring and evaluation in biomedical applications.2.6.2026 -
Mikroe GeoMagnetic 2 ClickFeatures the Bosch Sensortec BMM350 16-bit 3-axis magnetometer for geomagnetic field sensing.2.6.2026 -
Mikroe Thermo 32 ClickFeatures the onsemi N34TS108 low-voltage digital temperature sensor for temperature measurement.2.6.2026 -
Mikroe Accel 37 ClickFeatures the ADI ADXL366 micropower 3-axis digital output MEMS accelerometer.2.6.2026 -
Pervasive Displays EPD Extension Kit Gen3 Version 2 BoardDriver extension board that connects with a host system to enable ultra-low-power e-paper displays.2.6.2026 -
Mikroe RF Switch 2 ClickCompact add-on board for high-frequency RF signal routing in wireless and signal-management designs.1.6.2026 -
Mikroe 100MG TPS Pressure Click BoardFor gauge and differential pressure sensing in medical and environmental monitoring systems.1.6.2026 -
Mikroe Light 6 ClickAdd-on board for real-time light level detection, illumination monitoring and brightness adaptation.1.6.2026 -
Mikroe Boost 10 ClickCompact add-on board that provides a stable boosted output voltage for battery-powered devices.1.6.2026 -
Mikroe DAC 24 ClickFor digital-to-analog conversion in applications that require gain control and more.1.6.2026 -
Mikroe Current 15 ClickBased on ACS37100 TMR current sensor for bidirectional current measurement in embedded applications.1.6.2026 -
Mikroe BLDC FOC ClickFeatures the TI MCF8329A sensorless FOC 3-phase BLDC gate driver for 3-phase BLDC and PMSM motors.1.6.2026 -
Mikroe LTE Cat.1 5 Click for EuropeModule for 4G LTE cellular connectivity in European IoT, M2M, and consumer applications.1.6.2026 -
Mikroe Pressure 27 ClickBased on the Honeywell MPRSS0250KA00000C 250kPa MPR absolute pressure sensor.1.6.2026 -
Mikroe LTE Cat.1 5 Click for North AmericaModule for 4G LTE cellular connectivity in North American IoT, M2M, and consumer applications.1.6.2026 -
