SparkFun Accessories

Results: 942
Select Image Part #
 Mfr.
Description Datasheet Availability Pricing (EUR) Filter the results in the table by unit price based on your quantity.
Qty. RoHS ECAD Model Product
Type
SparkFun SparkFun Accessories This is a simple strip of five signal-conditioning Balun Ember Transformers from Wurth Elektronik that allows you to convert an unbalanced signal in a transmission line to a balanced one or vice versa. Each of these ICs possesses a frequency range o
Datasheet
Non-Stocked
Min.: 1
Mult.: 1

Baluns Balun Ember Transformer
SparkFun SparkFun Accessories Arduino Leonardo with Headers Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories The SparkFun gamer:bit is a fun-filled "carrier" board for the micro:bit that when combined with the micro:bit provides you with a fully functional game system. Designed in a similar form factor to the classic Nintendo NES controller the gamer:bit
Datasheet
Non-Stocked
Min.: 1
Mult.: 1
Kits SparkFun controller:bit - micro:bit Carrier Board

SparkFun SparkFun Accessories The SparkFun MicroMod Input and Display Carrier Board is a great way to add data and input visibility to your MicroMod project. Want to create your own embedded game? How about displaying data that is remotely collected and transmitted by your SparkF Non-Stocked
Min.: 1
Mult.: 1
Carrier Boards
SparkFun SparkFun Accessories We carry several data logging products which have microSD sockets on them: OpenLog Artemis and the Qwiic OpenLog to name but two. They're great for logging data to a microSD card but when it comes to reading the logged data quickly you usually have N/A
Min.: 1
Mult.: 1

Logging Shields Dual-Port Logging Shield
SparkFun SparkFun Accessories Can I bother you for a minute? Rubber Duck Debugging is the method of working through a problem by verbalizing the problem at hand. There is something that happens once you verbalize your problem that makes your brain skirt around the log jam and ju Non-Stocked
Min.: 1
Mult.: 1
Accessories Debugging Duck
SparkFun SparkFun Accessories SparkFun MicroMod GNSS Carrier Board (ZED-F9P)
Datasheet
Non-Stocked
Min.: 1
Mult.: 1

GNSS Carrier Boards MicroMod GNSS Carrier Board
SparkFun SparkFun Accessories When experimenting with GPS or RF it can be very handy to have the antenna on the top of your house or car with a clear view of the sky while you stay in doors and warm at your keyboard. This 2m (6.5ft) magnetic mount SMA extension does a great job o Non-Stocked
Min.: 1
Mult.: 1
Accessories Magnetic Mount SMA - 2m
SparkFun SparkFun Accessories The SparkFun Inventor s Kit (SIK) for micro:bit is a great way to get creative connected and coding with the micro:bit. The SIK for micro:bit provides not only the micro:bit board but everything you need to hook up and experiment with multiple ele N/A
Min.: 1
Mult.: 1

Kits Inventor's Kit Bridge Pack
SparkFun SparkFun Accessories The Base version of the SparkFun OpenLog Data Collector Kit with Machinechat is an easy way to organize and display your data with the OpenLog Artemis and JEDI One. The SparkFun OpenLog Artemis (without IMU) is an open source data logger that comes p Non-Stocked
Min.: 1
Mult.: 1
OpenLog Data Collectors
SparkFun SparkFun Accessories This is a basic 16 character by 2 line display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need 11 general I/O pins to interface to this Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This is similar to other 16x2 character LCDs that you've seen before but with one vibrant difference: The backlight is actually an RGB LED. This means that you can change the backlight of this display to any color you want by controlling the three ba
Datasheet
Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories The LCD-144-G2(GFX) is a compact and cost effective display module using the latest state of the art LCD (TFT) technology with an embedded GOLDELOX-GFX2 graphics processor that delivers stand-alone functionality to any project. Powerful graph Non-Stocked
Min.: 1
Mult.: 1

Modules
SparkFun SparkFun Accessories A staple for the electrical engineer. I can't tell you how many times I've been one clip short! Note: Sold as a single unit. Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories PCB mount clip to hold a AA battery. Sold in single units you'll need two. These work great for small low power applications that need a battery to run. Low cost and easy to use!Documents:Datasheet Non-Stocked
Min.: 1
Mult.: 1

Battery Holders
SparkFun SparkFun Accessories These are small spring terminals. Open the aperature with the small arm insert the wire release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories These are small spring terminals. Open the aperature with the small arm insert the wire release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/general connection to prevent users from connecting the peripheral incorrectly or reversed. This is for the female housing. Be Non-Stocked
Min.: 1
Mult.: 1

Connectors
SparkFun SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end bare cable on the opposite end.Dimensions: 100mm lengthDocuments:JST connector
Datasheet
Non-Stocked
Min.: 1
Mult.: 1

Wire & Cable Jumper Wire
SparkFun SparkFun Accessories This is a very simple but handy 2" square double sided perf board. Standard 0.1" spacing with a 4-40 (3mm) holes for mounting. Great for quickly prototyping stackable circuits. Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board
Datasheet
Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories These are standard screws with 2-56 thread and 3/8" long recommended for the small button pad sets. Can be used with a 2-56 nut.Sold in single units. Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Description: These are standard nuts with 2-56 thread. For use with 2-56 machine screws and five button pad set listed below.Sold in single units. Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control Non-Stocked
Min.: 1
Mult.: 1

Battery Holders
SparkFun SparkFun Accessories This beefy heatsink is designed to dissipate a lot of heat! The 6400BG heatsink fits TO-220 TO-218 TO-247 and Multiwatt packages - which means it's a great fit for the STA540 L298N and all of our T-220 package voltage regulators. Non-Stocked
Min.: 1
Mult.: 1

Heat Sinks