SparkFun Accessories

Results: 942
Select Image Part #
 Mfr.
Description Datasheet Availability Pricing (EUR) Filter the results in the table by unit price based on your quantity.
Qty. RoHS ECAD Model Product
Type
SparkFun SparkFun Accessories The RTK Facet Carrying Case helps protect your valuable high-precision GNSS receiver from the harsh elements of the field. Custom slots are molded into the case for the RTK Facet receiver a 915MHz radio + antenna as well as a large open slot for po Non-Stocked
Min.: 1
Mult.: 1
Enclosures Carrying Case
SparkFun SparkFun Accessories Sometimes all you need is a simple but durable carrying case for your parts or projects. The SparkFun Carrying Case is the same one we plan on using some of our newer kits (that you'll see released over the coming weeks and months). This is an inject Non-Stocked
Min.: 1
Mult.: 1
Carrying Cases
SparkFun SparkFun Accessories This is a rugged 10-way 3.5mm-pitch PCB terminal block & 3.5mm-pitch rising clamp screw socket. Ideal for robust I/O and power connections when paired together.Includes: 1x 10-way 3.5mm Rising Clamp Screw Socket 1x 10-way 3.5mm 90 Terminal Block Non-Stocked
Min.: 1
Mult.: 1
Fixed Terminal Blocks Terminals and Sockets
SparkFun SparkFun Accessories Here for all your mechatronic needs is a simple high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver 30.6 oz-in. of maximum torque at 0.14 sec/60 A standard 3-pin power and control cable is attached and Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a servo adapter cable that allows you to hookup your servo directly to alligator clip connections. On one end you have a shrouded male servo connector and on the other end three 30mm shrouded alligator clips. Alligator clips are a staple ite Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Here is a simple low-cost servo for all your mechatronic needs. This little guy is able to take in 6 volts and deliver 1.5kg/cm (at 6V). of maximum torque at 0.09 sec/60 (at 6V). This small servo comes with a standard 3 pin power and control cable
Datasheet
Non-Stocked
Min.: 1
Mult.: 1
Motors & Accessories Servo Motor
SparkFun SparkFun Accessories These are a pair of DG01D-E hobby motors with encoder with a hall speed encoder. The motor requires a voltage between 4.5-9V has a gearbox ratio of 1:48 and a speed of 140RPM at 4.5V. The voltage between positive and negative is determined according
Datasheet
Non-Stocked
Min.: 1
Mult.: 1
Motors & Accessories Motor with Encoder
SparkFun SparkFun Accessories This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing lightly the resistance changes from infinite to 300k. The sensor itself is thin and flexible but the resistance does not change w Non-Stocked
Min.: 1
Mult.: 1

Sensors
SparkFun SparkFun Accessories The MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa. We stock the SPI interface version of the sensor. Average current consumption is 10 A at one measurement per second.The se Non-Stocked
Min.: 1
Mult.: 1

Sensors
SparkFun SparkFun Accessories Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package it mates well with embedded electronics and can be used with common IR remotes. The TSOP382 is a miniaturized receive Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This tiny little guy is the ALS-PT19 an SMD ambient light sensor that is much smaller than the standard TEMT6000. The ALS-PT19 is capable of taking a voltage supply range of 2.5V to 5.5V and also functions as an NPN transistor. If you are looking fo Non-Stocked
Min.: 1
Mult.: 1

Sensors
SparkFun SparkFun Accessories Infrared proximity sensor made by Sharp. Part # GP2Y0A41SK0F has an analog output that varies from 3.1V at 4cm to 0.3V at 30cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend p Non-Stocked
Min.: 1
Mult.: 1

Sensors
SparkFun SparkFun Accessories This single disc load cell (sometimes called a strain gauge) can translate up to 50kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of the str Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This is the main PCB assembly used in the RTK Facet and is intended for users who need to repair a device. Open Source Hardware has the benefit of allowing a user to understand and repair a broken device themselves! For more information please see t Non-Stocked
Min.: 1
Mult.: 1
Replacement Parts RTK Facet Main Board v13
SparkFun SparkFun Accessories This is the enclosure and various bits needed to replace the housing of an RTK Facet and is intended for users who need to repair a device. Open Source Hardware has the benefit of allowing a user to understand and repair a broken device themselves! Non-Stocked
Min.: 1
Mult.: 1
Replacement Parts RTK - Facet Housing
SparkFun SparkFun Accessories This is the enclosure and various bits needed to replace the housing of an RTK L-Band Facet. Open Source Hardware has the benefit of allowing a user to understand and repair a broken device themselves! For more information please see the disassembly Non-Stocked
Min.: 1
Mult.: 1
Replacement Parts RTK - Facet L-Band Housing
SparkFun SparkFun Accessories This is the main PCB assembly used in the RTK L-Band Facet and is intended for users who need to repair a device. Open Source Hardware has the benefit of allowing a user to understand and repair a broken device themselves! This board does not include Non-Stocked
Min.: 1
Mult.: 1
Replacement Parts RTK Facet L-Band Main Board v14
SparkFun SparkFun Accessories This is the front display PCB assembly with a new overlay button and a replacement flex cable. This kit is used if the display or exterior button has failed in the RTK Facet or RTK Facet L-Band and is intended for users who need to repair a device. Non-Stocked
Min.: 1
Mult.: 1
Replacement Parts RTK - Facet Display/Button
SparkFun SparkFun Accessories This is the black silicone protective sock that is stretched over the RTK Facet or RTK Facet L-Band and is intended for users who need to repair a device. Open Source Hardware has the benefit of allowing a user to understand and repair a broken devic Non-Stocked
Min.: 1
Mult.: 1
Replacement Parts RTK - Facet Rubber Sock
SparkFun SparkFun Accessories This is your basic spool of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder. Mix: 63% Sn / 37% Pb Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is your basic tube of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 15 grams (around 5ft). Easy to solder with - recommended for beginners. Mix: 63% Sn / 37% Pb Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a very simple fixed temp quick heating 30W 110/120 VAC soldering iron. We really enjoy using the more expensive irons but if you really need a cheap iron for your tool box this lovely iron is a good choice. This is a low-cost iron and it Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This analog panel meter measures DC voltage from 0-5 volts with 2.5% accuracy. It has a clear and easy to read scale and an adjustable dial. These come in handy for measuring the output of sensors with 5V ranges. The face of the meter is 45x45mm over
Datasheet
Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Face it if you keep this up your workbench is going to turn into a galaxy of small parts with no place for anything and nothing in its place. Okay so maybe that just happens to some of us but everyone could use a little organization and that's exa Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Parts Box LilyPad (Magnetic) Non-Stocked
Min.: 1
Mult.: 1

Tools & Supplies Storage Boxes & Cases