|
|
SparkFun Accessories 2x3 Pin Shrouded Header
- PRT-10877
- SparkFun
-
1:
1,55 €
-
31In Stock
|
Mouser Part No
474-PRT-10877
|
SparkFun
|
SparkFun Accessories 2x3 Pin Shrouded Header
|
|
31In Stock
|
|
Min.: 1
Mult.: 1
|
|
Connectors
|
Headers & Wire Housings
|
|
|
|
SparkFun Accessories Stackable Header 2x23 Pin Female
- PRT-12790
- SparkFun
-
1:
2,84 €
-
367In Stock
|
Mouser Part No
474-PRT-12790
|
SparkFun
|
SparkFun Accessories Stackable Header 2x23 Pin Female
|
|
367In Stock
|
|
Min.: 1
Mult.: 1
|
|
Connectors
|
Headers & Wire Housings
|
|
|
|
SparkFun Accessories This is a simple 2x3 male PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet
- PRT-12807
- SparkFun
-
1:
0,688 €
-
44In Stock
|
Mouser Part No
474-PRT-12807
|
SparkFun
|
SparkFun Accessories This is a simple 2x3 male PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet
|
|
44In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of headers allows you to stack Feather
- PRT-15187
- SparkFun
-
1:
2,03 €
-
42In Stock
|
Mouser Part No
474-PRT-15187
|
SparkFun
|
SparkFun Accessories These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of headers allows you to stack Feather
|
|
42In Stock
|
|
Min.: 1
Mult.: 1
|
|
Connectors
|
Feather Stackable Header Kit
|
|
|
|
SparkFun Accessories Soldering Iron Stand
- TOL-09477
- SparkFun
-
1:
6,67 €
-
2In Stock
|
Mouser Part No
474-TOL-09477
|
SparkFun
|
SparkFun Accessories Soldering Iron Stand
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories 2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long. Not sure which RF connector you need on your antenna? Check out our RF Connector Guide
- WRL-00145
- SparkFun
-
1:
12,86 €
-
3In Stock
|
Mouser Part No
474-WRL-00145
|
SparkFun
|
SparkFun Accessories 2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long. Not sure which RF connector you need on your antenna? Check out our RF Connector Guide
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. This antenna mates nicely with the Reverse Polarized SMA Connector.
- WRL-00558
- SparkFun
-
1:
15,91 €
-
6In Stock
|
Mouser Part No
474-WRL-00558
|
SparkFun
|
SparkFun Accessories Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. This antenna mates nicely with the Reverse Polarized SMA Connector.
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories 900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long. Be sure to pick the antenna with the right connector. Almost all 2.4GHz and 915MHz antennas need to be RP-SMA.
- WRL-09143
- SparkFun
-
1:
8,56 €
-
76In Stock
|
Mouser Part No
474-WRL-09143
|
SparkFun
|
SparkFun Accessories 900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long. Be sure to pick the antenna with the right connector. Almost all 2.4GHz and 915MHz antennas need to be RP-SMA.
|
|
76In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to connect larger GPS antennas and quad-band cellular antennas.
- WRL-09145
- SparkFun
-
1:
4,95 €
-
111In Stock
|
Mouser Part No
474-WRL-09145
|
SparkFun
|
SparkFun Accessories This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to connect larger GPS antennas and quad-band cellular antennas.
|
|
111In Stock
|
|
Min.: 1
Mult.: 1
|
|
Cables
|
|
|
|
|
SparkFun Accessories This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL to SMA cables together we can go straight from one U.FL device to another. As an added bonus
- WRL-15114
- SparkFun
-
1:
2,37 €
-
51In Stock
|
Mouser Part No
474-WRL-15114
|
SparkFun
|
SparkFun Accessories This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL to SMA cables together we can go straight from one U.FL device to another. As an added bonus
|
|
51In Stock
|
|
Min.: 1
Mult.: 1
|
|
Cables
|
U.FL Mini Coax Cable - 200 mm
|
|
|
|
Crowd Supply Accessories A second or extra foot pedal for Pixel Pump.
- R-FPEDAL
- Robins Tools
-
1:
50,74 €
-
17In Stock
|
Mouser Part No
392-R-FPEDAL
|
Robins Tools
|
Crowd Supply Accessories A second or extra foot pedal for Pixel Pump.
|
|
17In Stock
|
|
Min.: 1
Mult.: 1
|
|
Accessories
|
Foot pedal for Pixel pump
|
|
|
|
Tinkerforge Accessories RGB LED Button Bricklet: Push button with built-in RGB LED
- 282
- Tinkerforge
-
1:
14,57 €
-
8In Stock
|
Mouser Part No
221-282
|
Tinkerforge
|
Tinkerforge Accessories RGB LED Button Bricklet: Push button with built-in RGB LED
|
|
8In Stock
|
|
Min.: 1
Mult.: 1
|
|
Bricklets
|
RGB LED Button
|
|
|
|
SparkFun Accessories These are various leaded cables for attaching to multimeters power supplies oscilloscopes function generators etc.Dimensions: 36" Long
- CAB-00504
- SparkFun
-
1:
7,19 €
-
9In Stock
|
Mouser Part No
474-CAB-00504
|
SparkFun
|
SparkFun Accessories These are various leaded cables for attaching to multimeters power supplies oscilloscopes function generators etc.Dimensions: 36" Long
|
|
9In Stock
|
|
Min.: 1
Mult.: 1
|
|
Cables
|
|
|
|
|
SparkFun Accessories Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.This is a 15ft. length of 10-wire ribbon cable. Check th
- CAB-10647
- SparkFun
-
1:
5,98 €
-
9In Stock
|
Mouser Part No
474-CAB-10647
|
SparkFun
|
SparkFun Accessories Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.This is a 15ft. length of 10-wire ribbon cable. Check th
|
|
9In Stock
|
|
Min.: 1
Mult.: 1
|
|
Cables
|
|
|
|
|
SparkFun Accessories Audio Cable TRRS - 1ft
- CAB-14163
- SparkFun
-
1:
1,56 €
-
68In Stock
|
Mouser Part No
474-CAB-14163
|
SparkFun
|
SparkFun Accessories Audio Cable TRRS - 1ft
|
|
68In Stock
|
|
Min.: 1
Mult.: 1
|
|
Cables
|
1 Feet Long, White Color
|
|
|
|
SparkFun Accessories These are your standard issue USB 2.0 type A to micro USB 5-pin... but wait what's this? These cables have minor yet genius modifications that allow both ends to be plugged into their ports regardless of their orientation. No longer will you fight
- CAB-15428
- SparkFun
-
1:
5,58 €
-
44In Stock
|
Mouser Part No
474-CAB-15428
|
SparkFun
|
SparkFun Accessories These are your standard issue USB 2.0 type A to micro USB 5-pin... but wait what's this? These cables have minor yet genius modifications that allow both ends to be plugged into their ports regardless of their orientation. No longer will you fight
|
|
44In Stock
|
|
Min.: 1
Mult.: 1
|
|
Cables
|
USB A to Micro-B Cable
|
|
|
|
SparkFun Accessories Your basic 7-segment LED. Common anode. Two decimal points but only the one on the right is wired. Digit height is 0.6". Overall height is 1"Documents:Datasheet Arduino Library (Thanks Derek!)
- COM-08546
- SparkFun
-
1:
1,55 €
-
25In Stock
|
Mouser Part No
474-COM-08546
|
SparkFun
|
SparkFun Accessories Your basic 7-segment LED. Common anode. Two decimal points but only the one on the right is wired. Digit height is 0.6". Overall height is 1"Documents:Datasheet Arduino Library (Thanks Derek!)
|
|
25In Stock
|
|
Min.: 1
Mult.: 1
|
|
Displays
|
7-Segment Display
|
|
|
|
SparkFun Accessories These are small rare earth magnets - 0.25" cubed. Composed of Neodymium/Iron/Boron (NdFeB) these magnets are curiously strong and make for a great way to attach tools to a metal workbench hold small children to a fridge and as a trigger for reed s
- COM-08643
- SparkFun
-
1:
1,53 €
-
20In Stock
|
Mouser Part No
474-COM-08643
|
SparkFun
|
SparkFun Accessories These are small rare earth magnets - 0.25" cubed. Composed of Neodymium/Iron/Boron (NdFeB) these magnets are curiously strong and make for a great way to attach tools to a metal workbench hold small children to a fridge and as a trigger for reed s
|
|
20In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin GND to the other and the center pin will have a voltage that varies from 0 to VCC depending on the rotati
- COM-09939
- SparkFun
-
1:
1,08 €
-
37In Stock
|
Mouser Part No
474-COM-09939
|
SparkFun
|
SparkFun Accessories An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin GND to the other and the center pin will have a voltage that varies from 0 to VCC depending on the rotati
|
|
37In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories Amphenol FCI Clinchr Conn. (3 POS,M)
- COM-14197
- SparkFun
-
1:
1,43 €
-
9In Stock
|
Mouser Part No
474-COM-14197
|
SparkFun
|
SparkFun Accessories Amphenol FCI Clinchr Conn. (3 POS,M)
|
|
9In Stock
|
|
Min.: 1
Mult.: 1
|
|
Connectors
|
Male FCI Clincher Connector with 3 Position
|
|
|
|
SparkFun Accessories This is a coin cell holder for the common CR2032 type battery. The holder has a neat pop-in pop-out feature that makes changing the battery easy. The feet of the holder have a small hole that allow it to be sewn without modification.
- DEV-08822
- SparkFun
-
1:
1,74 €
-
60In Stock
|
Mouser Part No
474-DEV-08822
|
SparkFun
|
SparkFun Accessories This is a coin cell holder for the common CR2032 type battery. The holder has a neat pop-in pop-out feature that makes changing the battery easy. The feet of the holder have a small hole that allow it to be sewn without modification.
|
|
60In Stock
|
|
Min.: 1
Mult.: 1
|
|
Battery Holders
|
Battery Holder - Coin Cell
|
|
|
|
SparkFun Accessories FTDI Cable 5V VCC-3.3V I/O
- DEV-09717
- SparkFun
-
1:
22,32 €
-
49In Stock
|
Mouser Part No
474-DEV-09717
|
SparkFun
|
SparkFun Accessories FTDI Cable 5V VCC-3.3V I/O
|
|
49In Stock
|
|
Min.: 1
Mult.: 1
|
|
Cables
|
USB Cables / IEEE 1394 Cables
|
|
|
|
SparkFun Accessories This is 30 feet of conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost of buying
- DEV-10867
- SparkFun
-
1:
5,27 €
-
11In Stock
|
Mouser Part No
474-DEV-10867
|
SparkFun
|
SparkFun Accessories This is 30 feet of conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost of buying
|
|
11In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories Dip sockets for all your prototyping needs. If you've ever had to de-solder a dip part from a circuit board you know how valuable these are! Number of pins include: 8 14 16 18 28 and 40.This is a 300mil wide 8-pin socket.
- PRT-07937
- SparkFun
-
1:
0,516 €
-
150In Stock
-
280Expected 07/12/2026
|
Mouser Part No
474-PRT-07937
|
SparkFun
|
SparkFun Accessories Dip sockets for all your prototyping needs. If you've ever had to de-solder a dip part from a circuit board you know how valuable these are! Number of pins include: 8 14 16 18 28 and 40.This is a 300mil wide 8-pin socket.
|
|
150In Stock
280Expected 07/12/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories Arduino Stackable Header - 8 Pin
- PRT-09279
- SparkFun
-
1:
0,85 €
-
287In Stock
-
1 200Expected 10/11/2026
|
Mouser Part No
474-PRT-09279
|
SparkFun
|
SparkFun Accessories Arduino Stackable Header - 8 Pin
|
|
287In Stock
1 200Expected 10/11/2026
|
|
Min.: 1
Mult.: 1
|
|
Connectors
|
Headers & Wire Housings
|
|
