Analog Devices Inc. AD4003/AD4007/AD4011 18-Bit Differential SAR ADCs

Analog Devices Inc. AD4003/AD4007/AD4011 18-Bit Differential Successive Approximation Register (SAR) ADCs are high accuracy, high speed, low-power ADCs. The 18-bit SAR ADCs operate at 1.8V single supply operation with a 1.71V to 5.5V logic interface. These SAR ADCs with high throughput allow accurate capture of high-frequency signals and decimation to achieve a high Signal-to-Noise Ratio (SNR). The AD4003/AD4007/AD4011 18-bit ADCs offer the ability to daisy-chain ADCs and operate at -40°C to +125°C temperature range. These SAR ADCs include an SPI-compatible, versatile serial interface that features seven different programmable modes with an optional busy indicator.

The AD4003/AD4007/AD4011 18-bit SAR ADCs are compatible with 1.8V, 2.5V, 3V, and 5V logic that uses a separate supply VIO. Typical applications include automatic test equipment, precision data acquisition systems, machine automation, medical equipment, and battery-powered equipment.

Features

  • 2MSPS/1MSPS/500kSPS throughput options
  • ±1.0 LSB (±3.8ppm) maximum INL
  • Guaranteed 18-bit no missing codes
  • Low power
    • 4.9mW/MSPS, 2.4mW at 500kSPS, VDD only
    • 8mW/MSPS, 80μW at 10kSPS, 16mW at 2MSPS total
  • SNR:
    • 100.5dB at fIN = 1kHz
    • 99dB at fIN = 100kHz
  • THD:
    • -123dB at fIN = 1kHz
    • -100dB at fIN = 100kHz
  • Easy drive:
    • Input current reduced to 0.5μA/MSPS, greatly reduced input kickback
    • Long acquisition phase, ≥79% of cycle time at 1MSPS
    • Input span compression for single-supply operation
    • Input overvoltage clamp protection sinks up to 50mA
  • Oversampled SNR
    • 103.5dB at 1.0MSPS, OSR = 2
    • 130.5dB at 1.9kSPS, OSR = 1024
  • 89dB SINAD at fIN = 1MHz
  • ±VREF differential input range
  • 2.4V to 5.1V VREF input range
  • Single 1.8V supply operation with 1.71V to 5.5V logic interface
  • First conversion accurate, no latency/pipeline delay
  • Fast conversion time allows low SPI clock rates
  • SPI-/QSPI-/MICROWIRE-/DSP-compatible serial interface
  • Ability to daisy-chain multiple ADCs
  • -40°C to +125°C operating temperature range
  • 3mm x 3mm LFCSP and 3mm x 4.90mm MSOP 10-lead packages
  • Pin compatible with AD4000/AD4004/AD4008 family

Applications

  • Automatic test equipment
  • Precision data acquisition systems
  • Machine automation
  • Medical equipment
  • Battery-powered equipment

Functional Block Diagram

Block Diagram - Analog Devices Inc. AD4003/AD4007/AD4011 18-Bit Differential SAR ADCs
View Results ( 10 ) Page
Part Number Datasheet Interface Type Sampling Rate SNR - Signal to Noise Ratio Pd - Power Dissipation Reference Voltage SINAD - Signal to Noise and Distortion Ratio THD - Total Harmonic Distortion
AD4007BRMZ AD4007BRMZ Datasheet SPI 1 MS/s 100.5 dB 12.3 mW 5.1 V 100 dB - 123 dB
AD4003BCPZ-RL7 AD4003BCPZ-RL7 Datasheet SPI 2 MS/s 91.5 dB 20 mW 2.4 V to 5.1 V 90 dB - 94 dB
AD4003BRMZ AD4003BRMZ Datasheet SPI 2 MS/s 91.5 dB 20 mW 2.4 V to 5.1 V 90 dB - 94 dB
AD4007BCPZ-RL7 AD4007BCPZ-RL7 Datasheet 3-Wire, QSPI, SPI 1 MS/s 100.5 dB 12.3 mW 5.1 V 100 dB - 123 dB
AD4011BCPZ-RL7 AD4011BCPZ-RL7 Datasheet SPI 500 kS/s 100.5 dB 6.2 mW 5.1 V 100 dB - 123 dB
AD4003BRMZ-RL7 AD4003BRMZ-RL7 Datasheet 3-Wire, QSPI, SPI
AD4007BRMZ-RL7 AD4007BRMZ-RL7 Datasheet 3-Wire, QSPI, SPI 1 MS/s 100.5 dB 12.3 mW 5.1 V 100 dB - 123 dB
AD4003BCPZ-R2 AD4003BCPZ-R2 Datasheet 3-Wire, QSPI, SPI 100.5 dB 80 uW 2.4 V to 5.1 V 100 dB - 123 dB
AD4007BCPZ-R2 AD4007BCPZ-R2 Datasheet 3-Wire, QSPI, SPI 100.5 dB 80 uW 2.4 V to 5.1 V 100 dB - 123 dB
AD4011BCPZ-R2 AD4011BCPZ-R2 Datasheet SPI, QSPI 100.5 dB 80 uW 2.4 V to 5.1 V 100 dB - 123 dB
Published: 2020-03-09 | Updated: 2024-09-20