Apacer Technology Inc. CM710-CF Industrial CompactFlash Card
Apacer Technology Inc. CM710-CF Industrial CompactFlash (CF) Card complies with the CF 6.1 standard compatible specification. This card offers high performance, high reliability, and power-efficient storage by adopting the standard 50-pin connector and MLC chip with higher capacity. The CM710-CF supports transfer modes up to Programmed Input Output (PIO) Mode-6, Multi-word Direct Memory Access (DMA) Mode-4, and Ultra DMA Mode-6 in True-IDE mode. This Apacer card supports a 96-bit ECC function, wear-leveling, Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.), and supply-voltage power-down detection for robust full-power-down. Typical applications include point-of-sale (POS) terminals, telecom, IP-STB, medical instruments, surveillance systems, industrial PCs, and digital single-lens reflex (DSLR) cameras.
Features
- Global Wear Leveling
- Supports S.M.A.R.T commands
- Flash block management
- Built-in BCH ECC capable of correcting up to 96 bits in 1KB data
- Power failure management
Applications
- Point of Sale (POS) terminals
- Telecom
- IP-STB
- Medical instruments
- Surveillance systems
- Industrial PCs
- Digital Single Lens Reflex (DSLR) cameras
Specifications
- CompactFlash Association Specification Revision 6.1 standard interface:
- ATA command set compatible
- ATA transfer mode supports:
- PIO Mode 6
- Multiword DMA Mode 4
- Ultra DMA Mode 6 in True-IDE mode
- 8GB, 16GB, 32GB, 64GB, and 128GB capacities
- Performance:
- Sequential read: Up to 90MB/sec
- Sequential write: Up to 55MB/sec
- Random read (4K): Up to 2,000IOPS
- Random write (4K): Up to 1,000IOPS
- Flash management:
- Global wear leveling
- Built-in BCH ECC capable of correcting up to 96-bits in 1KB data
- Supports S.M.A.R.T commands
- Flash block management
- Flash translation layer: Page mapping
- Power failure management
- Endurance (in Terabytes Written: TBW):
- 8GB: 3TBW
- 16GB: 8TBW
- 32GB: 15TBW
- 64GB: 24TBW
- 128GB: 58TBW
- Halogen-free
- MLC NAND flash type
- >3,000,000 hours MTBF
- Reliability:
- Supply voltage power-down detection for full power-down robustness
- Temperature range:
- Operating:
- Standard: 0°C to 70°C
- Wide: -40°C to 85°C
- Storage: -40°C to 100°C
- Operating:
- Supply voltage:
- 3.3V ± 5%
- 5.0V ± 10%
- Power consumption:
- 3.3V operating voltage
- 165mA active mode
- 10mA standby mode
- 5.0V operating voltage
- 170mA active mode
- 10mA standby mode
- Connector type:
- 50 pins female
- Form factor:
- 36.4mm x 42.8mm x 3.3mm
- Net Weight: 9.82g ± 5%
- RoHS recast compliant:
- Complies with 2011/65/EU standard
Functional Block Diagram
