TE Connectivity / DEUTSCH DT Connectors
TE Connectivity's (TE) / DEUTSCH DT Connectors are environmentally sealed and designed specifically for cable-to-cable and cable-to-board applications in harsh environments. This series is ideal for use in situations where even a small degradation in connection may be critical. V0-recognized thermoplastic (-55°C to +125°C rated) housings and silicone seals enable the connectors to withstand extreme temperatures, moisture, and UV. These connectors offer the ability to use multiple size 16 contacts, each with 13A continuous capacity, within a single shell. TE DEUTSCH DT Connectors provide reliability and performance on the engine or transmission, under the hood, on the chassis, or in the cab.
Features
- Integral connector latch
- Designed specifically for cable-to-cable and cable-to-board applications in harsh environments
- Rugged thermoplastic housing
- Available in 2, 3, 4, 6, 8, and 12 sizes
- V0-recognized thermoplastic housing
- Features a wide operating temperature range
- Resistant to UV exposure
- Up to IP68 rating against debris and moisture provided by silicone rear wire and interface seals
- Accepts 18AWG to 14AWG
- Crimp contacts with the option of gold or nickel, solid, or stamped
- 13A current rating on all contacts
- Hand insertable/removable contacts
- -55°C to +125°C operating temperature range
Features
- -55°C to +125°C continuous operating temperature at rated current
- Durability - no electrical or mechanical defects after 100 cycles of engagement and disengagement
- Vibration
- No unlocking or unmating and exhibits no mechanical or physical damage after sinusoidal vibration levels of 20G's at 10Hz to 2000Hz in each of the three mutually perpendicular planes
- No electrical discontinuities longer than 1ms
- Physical shock
- No unlocking, unmating, or other unsatisfactory result during or after 50G’s in each of three mutually perpendicular planes
- No electrical discontinuities longer than 1ms
- MIL-STD 202, Method 213, Condition “C”
- Fluid resistance - connectors show no damage when exposed to most fluids used in industrial applications
- 1000MΩ minimum insulation resistance at +25°C
- Moisture resistance - properly wired and mated connections will withstand immersion under 3 feet of water without loss of electronic qualities or leakage
- <2mA current leakage at 1500VAC
- Thermal cycle - no cracking, chipping, or leaking after 20 test cycles from -55°C to +125°C
Additional DT Types
SAE J1939/11 Connectors and Components - Rugged DT three-pin connectors. Designed to meet the SAE requirements for three-wire CAN applications linking ECUs for serial data communications.
DT Detector Connectors - Two-way plugs featuring a transparent housing and a wedge lock with an integrated 12V or 24V LED option.
Dimensions
Videos
Related Products
TE Connectivity EV & Connected Transportation
Portfolio of products for today's world, especially as technology advances toward sustainability.
TE Connectivity Industrial & Commercial Transportation
Products to protect electrical systems in heavy equipment from a variety of contaminants.
TE Connectivity / DEUTSCH DT Family Connectors
Environmentally-sealed connectors designed for cable to cable applications.